Overview of Fox DPX2 IFP rebuild (light damper service) - not a complete service
This video skips a few steps, in part to keep you from getting into trouble. It assumes that you are already familiar with working on Fox float dampers.
If you would like to have me service your DPX2 for the IFP seal and Air Sleeve maintenance, please check out my website: http://insightbike.com/dpx2.html - My website needs some clarification, the $110 service does not include shipping and air seals. A more realistic full service, light damper overhaul with return shipping is $165 roughly.
To request service, Please fill out this form:
https://forms.gle/azR2e1u1ATL4Knfz9
Otherwise, producing this video assumes that you just want to see the basic going's-on of the Fox DPX2 basic damper service, IFP seal replacement and oil refresh.
Fox's instructions: https://www.ridefox.com/fox17/help.php?m=bike&id=890
There you will find a more detailed procedure and the tool list.
The IFP seal is just an o'ring 27mm OD/3.5mm thick(20mm ID):
https://www.mcmaster.com/9262K793/(pack of 100)
Sometimes it's also necessary to replace the main piston seal head o'ring:
https://www.mcmaster.com/9558K544/
0:00 Introduction
0:29 What cavitation sounds like
1:13 Evacuating the nitrogen/oil pressure
2:05 Removing the piggyback seal head assembly
4:30 Removing the piggyback IFP
4:57 Squirt
5:52 Reinstall the shock body, don't forget to torque the seal head
8:16 Install the IFP bleed screw
8:32 Remove needle valve nut on shock body
9:18 Reinstall needle valve nut, close off the port, extend damper slowly
10:41 REASSEMBLE THE IFP SEAL HEAD ASSEMBLY
Found this link, thought it was interesting, probably oughta say to not try it at home: https://www.huckingkitty.com/forums/viewtopic.php?f=11&t=680
Видео Overview of Fox DPX2 IFP rebuild (light damper service) - not a complete service канала Insight Bike Works
If you would like to have me service your DPX2 for the IFP seal and Air Sleeve maintenance, please check out my website: http://insightbike.com/dpx2.html - My website needs some clarification, the $110 service does not include shipping and air seals. A more realistic full service, light damper overhaul with return shipping is $165 roughly.
To request service, Please fill out this form:
https://forms.gle/azR2e1u1ATL4Knfz9
Otherwise, producing this video assumes that you just want to see the basic going's-on of the Fox DPX2 basic damper service, IFP seal replacement and oil refresh.
Fox's instructions: https://www.ridefox.com/fox17/help.php?m=bike&id=890
There you will find a more detailed procedure and the tool list.
The IFP seal is just an o'ring 27mm OD/3.5mm thick(20mm ID):
https://www.mcmaster.com/9262K793/(pack of 100)
Sometimes it's also necessary to replace the main piston seal head o'ring:
https://www.mcmaster.com/9558K544/
0:00 Introduction
0:29 What cavitation sounds like
1:13 Evacuating the nitrogen/oil pressure
2:05 Removing the piggyback seal head assembly
4:30 Removing the piggyback IFP
4:57 Squirt
5:52 Reinstall the shock body, don't forget to torque the seal head
8:16 Install the IFP bleed screw
8:32 Remove needle valve nut on shock body
9:18 Reinstall needle valve nut, close off the port, extend damper slowly
10:41 REASSEMBLE THE IFP SEAL HEAD ASSEMBLY
Found this link, thought it was interesting, probably oughta say to not try it at home: https://www.huckingkitty.com/forums/viewtopic.php?f=11&t=680
Видео Overview of Fox DPX2 IFP rebuild (light damper service) - not a complete service канала Insight Bike Works
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
![Pro tips bleeding Shimano brakes with shimano mineral oil](https://i.ytimg.com/vi/1M-l5_IxoOE/default.jpg)
![SRAM brake bleed pro tip - replace the orings #mountainbike #brakebleed #biketune](https://i.ytimg.com/vi/JfpXbMmS5H4/default.jpg)
![How do I Overhaul a Fox Float RP23 Main Piston Sealhead & set the IFP](https://i.ytimg.com/vi/RmJ4Wi-KITQ/default.jpg)
![Shortening and bleeding Sram Hydraulic Brake Line - Avid Trail SRAM Guide](https://i.ytimg.com/vi/-Ap8URuov8c/default.jpg)
![Fox Overhaul for Float RL uses RP3 damper kit #mtb #mechanic #diy](https://i.ytimg.com/vi/OuWfOpmgZIA/default.jpg)
![How I Rebuild & Overhaul a Fox RP23 - Eyelet Assembly](https://i.ytimg.com/vi/LQPEfNyNHjw/default.jpg)
![Using the Enduro bearing removal tool for Rocky Mountain Bikes BRT-006](https://i.ytimg.com/vi/Rm5Vkla6E1s/default.jpg)
![Bleeding Sram Guide (Avid Trail) DOT 5.1 Hydraulic Brakes - use the Sram bleed kit!](https://i.ytimg.com/vi/bsNVM1UYUgg/default.jpg)
![Get Sram Eagle on your E.thirteen hub or wheels](https://i.ytimg.com/vi/3uFHT7q2eOI/default.jpg)
![The business end of your Fox Shox rear shock DPS, CTD, Float, RP23, #foxshocks #bikerepair #mtnbike](https://i.ytimg.com/vi/EUDpKuZ_u9s/default.jpg)
![Thoughts on new shocks from Fox Racing](https://i.ytimg.com/vi/UBgaGXVUSQE/default.jpg)
![How do you test your rear shock off the bike? up.bike hand dyno](https://i.ytimg.com/vi/B6d40fDWXt8/default.jpg)
![White rim trail in one day unsupported on a fatbike](https://i.ytimg.com/vi/fZvmgPMeqbM/default.jpg)
![Reinstalling the Rear Shock on Your Mountain Bike](https://i.ytimg.com/vi/qvTEUK32JB8/default.jpg)
![Preventative Mountain Bike maintenance - How I Know What To Fix](https://i.ytimg.com/vi/ePPa1B-1b1I/default.jpg)
![One Way to Fix a Stuck Down Shock - Fox Racing Shox - Rockshox](https://i.ytimg.com/vi/sb-2Poqr-eU/default.jpg)
![Full Shimano Brake Bleed - Bottom Up - Full Dangle - Shimano Brakes Not Feeling Positive?](https://i.ytimg.com/vi/UgU0-UvPsTI/default.jpg)
![Why are bike wheels so tough? #cycling #mtb #bicycle](https://i.ytimg.com/vi/XqUEkec2uKs/default.jpg)
![Welcome to Insight Bike Works #mtb #cycling #mountainbike](https://i.ytimg.com/vi/6xF9tYBBS5M/default.jpg)
![Basic Description and Disassembly of Fox Racing CTD Shock](https://i.ytimg.com/vi/oOGYs15GCQg/default.jpg)
![Mountain Bike Wheel Build Montage - Who wants to see more? leave a comment](https://i.ytimg.com/vi/DqhSTDmsTEs/default.jpg)