TRICO Ice Side Pin Long 22mm Wiper Blade Installation Video (Subtitles)

- With this arm type, it is necessary to remove the pre-attached adaptor on the wiper blade, and replace it as follows, with adaptor “BC”:
- Identify the release tab for the pre-attached adaptor.
- Press the tab down with your thumb, while pushing the pre-attached adaptor back toward the release tab.
- The adaptor will disengage from the blade. Discard it.
- Locate adaptor “BC”. Lower adaptor “BC” into the cavity in the top of the blade.
- Slide adaptor “BC” in the opposite direction of the release tab until it “clicks” in place.
- Adaptor “BC” must lock onto the blade before proceeding to the next step.
- Locate adaptor cover “E” and position it on an angle above adaptor “BC”. Make sure the hole on the top of the cover is at the lower end. Align the tabs at the lower end of the cover with the tabs at the back end of the adaptor.
- Rotate the cover down onto the adaptor until it locks in place.
- Hold the blade at a 90 degree angle to the end of the wiper arm and push it all the way onto the arm pin.
- Rotate the blade until the tab on the top of the arm straddles the top of the blade.
- The wiper blade will lock onto the arm where indicated.
- Before use, be sure the wiper blade is locked onto the wiper arm.

Видео TRICO Ice Side Pin Long 22mm Wiper Blade Installation Video (Subtitles) канала TRICO Wiper Blades