Older and fatter, new wheels and bare metal.
In this epidosde that took me 2 years to make, i get fatter and older as well as new wheels and sanding the truck to bare metal.
Видео Older and fatter, new wheels and bare metal. канала Grind Palace
Видео Older and fatter, new wheels and bare metal. канала Grind Palace
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
![Making mounts and fitting Audi TT rear dampers on my MK1 Caddy Pickup VR6 Turbo build](https://i.ytimg.com/vi/MNgFtDxHdBY/default.jpg)
![VW MK1 Caddy Tailgate Straighten, Handle Delete and Custom Roller Bearing Hinge](https://i.ytimg.com/vi/8bDWH4ClOxA/default.jpg)
![Odd jobs and primer for the engine bay in my MK1 Caddy Pickup / Rabbit Pickup VR6 Turbo AWD build](https://i.ytimg.com/vi/3UkN9YZcKXc/default.jpg)
![DIY foot handbrake, making tailgate hinges and painting the cab and gearbox gold](https://i.ytimg.com/vi/ZNofNwiVTtM/default.jpg)
![DIY EV motor reveal, cavity rust proofing and fixing a seized coilover on my mk1 caddy pickup](https://i.ytimg.com/vi/273D41ZsAyQ/default.jpg)
![DIY Metal shaping by hand to finish the bed on my VW MK1 Caddy Pickup Build](https://i.ytimg.com/vi/7gZjdjahy_w/default.jpg)
![Merc Seats, Audi steering wheel and final prep before epoxying the bottom of my MK1 Caddy Pickup](https://i.ytimg.com/vi/--cYMlvQbbg/default.jpg)
![MK1 Caddy Pickup / Rabbit Pickup VR6 Turbo Haldex AWD conversion build intro](https://i.ytimg.com/vi/KSSGStpfaJ4/default.jpg)
![MK1 Caddy Pickup / Rabbit Pickup wooden roll over jig rotisserie and VR6 turbo build](https://i.ytimg.com/vi/lM_xDfCgLMk/default.jpg)
![Grind Palace Channel Homepage Trailer](https://i.ytimg.com/vi/tCtmXv5C7yQ/default.jpg)
![MK1 Caddy Pickup / MK1 Rabbit Pickup VR6 Turbo Build - Under Bed Charge Cooler Alloy Tank Mounting](https://i.ytimg.com/vi/afxzkmY8lyc/default.jpg)
![Fitting a Retrofication replacement bed floor panel in my MK1 Caddy Pickup build](https://i.ytimg.com/vi/Zynem3NZcss/default.jpg)
![DIY Rollbar pt.2 for my MK1 Caddy Pickup / Rabbit Pickup VR6 Turbo AWD build](https://i.ytimg.com/vi/CSVDAAuyToU/default.jpg)
![MK1 Caddy Pickup / Rabbit Pickup rear sil replacment on my Haldex AWD VR6 Turbo build](https://i.ytimg.com/vi/dn9SVBGT1u8/default.jpg)
![DIY tube notching without a tube notcher for the Roll Bar on my MK1 Caddy Pickup / Rabbit Pickup](https://i.ytimg.com/vi/thhU8NLilTU/default.jpg)
![MK1 Caddy Pickup / MK1 Rabbit Pickup VR6 Turbo Build - Under Bed Battery Relocation and Swirl Pot](https://i.ytimg.com/vi/c8POnVgIry8/default.jpg)
![4motion Mk1 Caddy Pickup PU Seam Sealer and Epoxy Mastic 121 The Bed](https://i.ytimg.com/vi/URayZKCdgfY/default.jpg)
![Pt 2. DIY flared metal arches, Ally welding and pipe hangars on my Haldex MK1 Caddy Pickup](https://i.ytimg.com/vi/8oYYGvrhOPk/default.jpg)
![Start of a DIY Custom Diffuser and new shop for the Caddy Pickup!](https://i.ytimg.com/vi/fKlxtwEWIyE/default.jpg)
![Installing a Wilwood reverse swing bias pedal box + drive by wire accelerator in my mk1 caddy pickup](https://i.ytimg.com/vi/wyM5Q8_HS5I/default.jpg)