Installing Anchor Resin Bolts 🔩 | Single Storey Extension #16

We're proud to be sponsored by James Hardie, the global leaders in manufacturing fibre cement products. Be sure to check out their exciting range of products here: https://bit.ly/3kpdtRd

In this video SINGLE STOREY EXTENSION - INSTALLING ANCHOR RESIN BOLTS we see the finishing off the roof rafters with batten and insulation and the flat roof construction continues with the addition of fillet strips and plywood. Alex does a corner brick detail laying a tile creasing course. John explains the reason to insulate webbing of steel to prevent cold bridging. Pete is seen using the mag drill on the gable steel so the ladder frame will bolt on and this will hold the fascia board. Then the tongue and groove soffit can be replicated as on the flat roof. There is timelapse block laying from Alex and he is fitting a wall starter kit before continuing with block work and installing insulation to wall cavity and taping insulation joints. John explains in detail how to fit anchor resin bolts and using the threaded bar coach bolts and square washers. After cutting bolts to size Pete uses his external chamfer tool drill bit to remove burrs from bolts. Lastly Pete shows how to construct a ladder frame which is fitted to the gable end steel.

Blow Out Pump - https://amzn.to/3iZKaFx

External Chamfer Tool Drill Bit - https://www.ebay.co.uk/sch/i.html?_from=R40&_trksid=p2322090.m570.l1313&_nkw=Deburring+External+Chamfer+Tool+Drill+Bit&_sacat=0

PLEASE NOTE: we’ll endeavour to answer questions and comments as soon as possible depending on our work schedules.
_________________________________

For all our socials! ▶https://linktr.ee/buildwith_ae

Music from Epidemic Sound and the YouTube Audio Library
_________________________________

#HomeRenovation #Construction #Roofing

Installing Anchor Resin Bolts 🔩 | Single Storey Extension #16

Видео Installing Anchor Resin Bolts 🔩 | Single Storey Extension #16 канала Build With A&E