Vance Matcher Pressure Plate: Face Milling on a Horizontal Mill
In this video we do several face milling operations on the Kearney & Trecker 2H Horizontal mill along with drilling and tapping some left hand threads.
Видео Vance Matcher Pressure Plate: Face Milling on a Horizontal Mill канала Keith Rucker - VintageMachinery.org
Видео Vance Matcher Pressure Plate: Face Milling on a Horizontal Mill канала Keith Rucker - VintageMachinery.org
Показать
Комментарии отсутствуют
Информация о видео
30 июня 2014 г. 7:06:29
00:47:28
Другие видео канала
Steam Locomotive Connecting Rod Bearings - Fitting Up the Second Bearing and Installation
Thompson Grinder Restoration: Hydraulic System and Finishing Touches
Brazing Cast Iron: Brazing a Broken Yoke Casting
Monarch 612 Lathe Restoration: Machining a New Lever Handle Bushing with a Square Broached Hole
Camelback Drill Press Gears 2: Cutting Gear Teeth on the First Gear
Vulcan Steam Locomotive Spring Hangers - Machining the Details after Forging
Steam Locomotive Connecting Rod Bearings - Finishing up the Right Side Rod and Bearings
Diresta Bandsaw Restoration 27: Finishing the Bottom Wheel and Installing the Table
Monarch 612 Lathe Restoration: Minor Repairs and Painting the Lathe Carriage
Monarch 612 Lathe Restoration: Rebuilding the Compound
Hydraulic Press Restoration: Retrofitting a Table Lifting Winch to the Press
Blacksmith Forge Blower: Machining a New Spur Gear from a Rough Casting
Horizontal Boring Mill Restoration: Installing the Table Lead Screw and Tailstock Base
Lucas Horizontal Boring Mill Restoration: Making a Morse Taper No. 5 Tailstock Adapter
Vulcan Steam Locomotive Connecting Rod Bearings: Gang Milling on the Horizontal Milling Machine
Monarch 612 Lathe Restoration: The Tailstock Dilemma - Making One Good One from Two....
Tally Ho Capstan Project: Contouring Milling & Finishing Up the Adapter Flange
Boring Steam Locomotive Connecting Rod Bronze Bearings to Size
Monarch 612 Lathe Restoration: Finishing up Details - Doors, Knobs, Jib Crane...
Modifying a Stock Gear For a Metal Lathe Repair
Monarch 612 Lathe Restoration: Adapting a Rack and Pinion Crank to Move the Tailstock