DIY 10 element yagi antenna for cellular networks, 2g,3g,4g || works pretty well in no network area

Links:-
Patch antenna (simple yet effective) - https://youtu.be/ftlTyv3zi4k
How to make driven element balun - https://youtu.be/BL5AqSWkBK4

In this video I am making a 10 element yagi antenna, which is double sided, it works with most of the 2g,3g and 4g bands. In my location its very difficult to find network, for making calls or for surfing internet we need to go to a specific place.
If you are facing the same problem, then watch this video till the end and make your own personal antenna at home. Features of this antenna is limited but as you know something is better than nothing.

This antenna is not best and so to make it better please give your ideas and experience, I'll continue improving these type of antenna.

MEASUREMENTS

Boom length = 600mm
Boom diameter = 20mm
Reflector diameter = 270mm
Dipole length = 355mm
Dipole width = 10mm
Dipole thickness = 1mm
Elements diameter = 6mm

Lengths of parasitic elements
SIDE A elements:-
E1 = 85mm
E2 = 75mm
E3 = 74mm
E4 = 64mm
E5 =62mm
E6 = 52mm
E7 = 49mm
E8 = 39mm

SIDE B Elements
E1 = 137mm
E2 = 127mm
E3 = 126mm
E4 = 109mm
E5 = 106mm
E6 = 96mm
E7 = 94mm
E8 = 80mm

POSITIONS
Parasitic elements spacing = 26.5mm
Dipole distance from E1 = 27mm
Reflector distance from dipole =115mm

CREDITS
Special thanks to Akhil Dhananjay for sending me rods, without it this would not be possible.
Final conclusion is, this antenna didn't work as my expectation.
I was hoping for great internet speed but its not so fast, So from now on I will start a new project for better internet speed, so stay updated.

For that please subscribe to our channel and also press the bell icon.
Like share, subscribe and keep supporting us.

Thanks for watching...

Видео DIY 10 element yagi antenna for cellular networks, 2g,3g,4g || works pretty well in no network area канала THE TECHIE TECH