How to drain geyser | how to drain water heater | how to change geyser heating element/rod (part 1)

how to change geyser heating element (part 2) - https://youtu.be/cTynUrpsf14

This video is about how you can simply drain the water from your geyser if you want to do a maintenance , cleaning or want to change the heating element.
First of all you need to disconnect the power code then remove the safety plates near the inlet and outlet pipes.Then one by one disconnect all the wire connections and remove the thermostat and thermocouple.
After this remove the inlet safety valve and remove the drain bolt and the water will start coming out from the geyser.

Tools used
- Pliers ( buy link - https://amzn.to/3qw0RKv ) (affiliate)
- Screwdriver ( BUY LINK - https://amzn.to/3mADQ6F )
- Socket 11 mm
- SPANNER ( BUY LINK - https://amzn.to/2Vy2Lvy )

SOCKET SET buy link - https://amzn.to/3mDDf4e (affiliate)

Hope this video is helpful for you
Thank you for watching

MORE VIDEOS
how to change clutch cable - https://youtu.be/5fVmKYeRQos
Geyser thermostat repair - https://youtu.be/9CHrbNjUIoE
Self start relay check - https://youtu.be/iEFMrdzzA-U
Car service at home - https://youtu.be/3s79if92QLs
Dead battery repair/recover - https://youtu.be/DU4OlXY1W3w

Видео How to drain geyser | how to drain water heater | how to change geyser heating element/rod (part 1) канала SAI REPAIR