RB30 Budget Build - Machining and Balancing | PART 2
The RB30 Budget Build Continues. On part 2 we explain the machining process involved with building an engine. Crank cleaning, linishing, decking the block, installing restrictors, rod re-sizing and balancing everything from Crank, rods and pistons.
Big thanks to Darren from Lewis Engines for giving me his time and knowledge throughout this whole process. For any info about the parts he sells please visit his website here - http://bit.ly/LEWISENGINES
Part 1 - https://youtu.be/aSoJ5kXsf-0
Part 2 - https://youtu.be/HGGwsSHfXPM
Part 3 - https://youtu.be/gWVFMPF8pkI
Part 4 - https://youtu.be/CbgEkk2Ps_Q
This channel is all about my life. I Drift as much as I can and when i'm not drifting I'm in the Shed building, upgrading and doing what ever I can to get back out Drifting.
Want to see more of my Sonvia, the 1000HP RBM3 or anything I get up to in my busy world. Then Please Subscribe here!
http://bit.ly/SUBTHESQUID
My website http://bit.ly/DRIFTSQUID
For business enquires please contact me via email jake@driftsquid.com
DriftSquid Clothing, stickers, hats, stubbies are all here
http://bit.ly/DriftSquidSHOP
- Instagram http://bit.ly/DSINSTAGRAM
- Facebook http://bit.ly/DSFACEBOOK
Music from Epidemic Sound
Видео RB30 Budget Build - Machining and Balancing | PART 2 канала DriftSquid
Big thanks to Darren from Lewis Engines for giving me his time and knowledge throughout this whole process. For any info about the parts he sells please visit his website here - http://bit.ly/LEWISENGINES
Part 1 - https://youtu.be/aSoJ5kXsf-0
Part 2 - https://youtu.be/HGGwsSHfXPM
Part 3 - https://youtu.be/gWVFMPF8pkI
Part 4 - https://youtu.be/CbgEkk2Ps_Q
This channel is all about my life. I Drift as much as I can and when i'm not drifting I'm in the Shed building, upgrading and doing what ever I can to get back out Drifting.
Want to see more of my Sonvia, the 1000HP RBM3 or anything I get up to in my busy world. Then Please Subscribe here!
http://bit.ly/SUBTHESQUID
My website http://bit.ly/DRIFTSQUID
For business enquires please contact me via email jake@driftsquid.com
DriftSquid Clothing, stickers, hats, stubbies are all here
http://bit.ly/DriftSquidSHOP
- Instagram http://bit.ly/DSINSTAGRAM
- Facebook http://bit.ly/DSFACEBOOK
Music from Epidemic Sound
Видео RB30 Budget Build - Machining and Balancing | PART 2 канала DriftSquid
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
RB30 Budget Build - Bottom end | PART 3How to make a reliable RB - basic to 10K RPM 1000 hpSBC--BLOCK PREP & MACHININGSonvia Rebuild | Crank issue | Shimming the Oil PumpMachining a Custom Prop Shaft Part 11200HP Duramax Engine Build |EP1| Parts OverviewWHY IS THE RB30 SO GREAT!?What is a BILLET ENGINE, and when should you get one? vs cast 2JZ: Bullet Race Engineering Tour.SMART-HAYABUSA PART 5.1 ---- THE SUBFRAME BUILT ---Meeting the legend Charlie Dixon | Chux Garage | Driving with DixonRB30 Budget Build - Bottom end Completed - RB25 Head tricks and tips | PART 4BEST sounding Nissan RB30 | fullBOOSTHow to build a 2500hp street engine!!Crankshaft Balancing – Part 12JZ RACING CYLINDER HEAD INSTALL ULTRA DETAILEDChanging rims super fast (Game Changer) - SPEEDSOCKET2020 Supra 1000 HP Engine Assembly - Start to FinishWhich RB Block is Best? Mythbusted with Facts and Data!Sonvia NEO engine build