UPGRADES AND WARRANTY WORK ON OUR RANGER TUG R27OB "CHANNEL SURFING"/ What upgrades did we do?

Check out our Website: letsgochannelsurfing.com
Contact us by Email: channelsurfing@nethkin.net

If you're interested in your own boat swag, LaZina opened a store where she hand-makes different items personalized for your boat from her shop in our home. Check out(channelsurfingcreations.com) if you would like to support us in keeping the videos coming.

If you would like to support us:
https://paypal.me/channelsurfing
https://www.Buymeacoffee/channelsurfing

This video is about all of the upgrades and warranty work we have done on "Channel Surfing" in the 10 months that we have owned her.

What I used to replace my batteries:
600Amp positive busbar
https://www.bluesea.com/products/2104/PowerBar_600A_Busbar_-_Four_3_8in-16_studs
250Amp negative busbar
https://www.bluesea.com/products/2126/MaxiBus_250A_BusBar_-_Six_5_16in-18_Studs
This might all be oversized because I'm not that electrician that spent any time calculating voltage drop over the extra distance. I basically took the approach that since I'm doing the work myself, I can upsize to ensure I'm safe and still be way ahead cost wise.  I also put in a power post for the thruster battery. 
https://www.bluesea.com/products/category/28/104/PowerPost_Connectors/PowerPost_Plus
 The GXM54 antenna itself was $700 on amazon.  The mount for it was $30. There isn't a spot on the mast to install it currently.  So I went with this mount, found it off the shelf at West Marine, of all places. 
https://www.westmarine.com/buy/west-marine--nylon-rail-mount-without-lever--7850308?recordNum=26
The XM radio antenna addition to the Fusion radio. I spent an extra $30 on this instead:
https://www.milltechmarine.com/Portable-GPS-Antenna-with-SMA-Connector_p_170.html
The Vesper 8000 has a built-in GPS antenna. It's not strong enough to get a signal outside of the helm. BUT, putting this portable GPS antenna just right on top of the Vesper behind the helm works perfectly.
 I used heavy-duty waterproof velcro to stick the AIS and the Splitter to the fiberglass behind the helm.
https://www.amazon.com/gp/product/B07CBT5FVP/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1

* Upgraded the house battery bank to Firefly (3 total) (348Ah total with approximately 225Ah usable)
https://fireflyenergy.com/oasis-mcf-g31.html
 
* Relocated House battery bank to cockpit center lazarette to improve boat balance. //www.youtube.com/watch?v=AehPUYetDzU&t=620s
 
* Added an additional battery charger (Victron Blue Smart IP67 25amp) to support larger house bank.
https://www.victronenergy.com/chargers/blue-smart-ip67-charger-waterproof
 
* Added Victron BMV-712 battery monitor for the house battery bank
https://www.victronenergy.com/battery-monitors/bmv-712-smart
 
* Added Victron voltage and temp monitors to engine, house and thruster battery banks.
https://www.victronenergy.com/accessories/smart-battery-sense
 
* Upgraded to a Victron SmartSolar MPPT 100/30 Solar Panel Controller 
https://www.victronenergy.com/solar-charge-controllers/smartsolar-100-30-100-50
 
* Added a Garmin GXM54 XM/Weather antenna
https://buy.garmin.com/en-US/US/p/675718
 
* Added a XM Antenna to the Fusion Stereo
https://shop.siriusxm.com/siriusxm-sxv300-connect-vehicle-tuner.html
 
* Added a Vesper XB-8000 AIS and S160 VHF Splitter
https://www2.vespermarine.com/xb8000-ais-transponder
https://www2.vespermarine.com/antenna-splitter-sp160
 
* Upgraded the 30amp shore power connection to a Smart Plug
https://smartplug.com/product/smartplug-combo-kit/
https://www.youtube.com/watch?v=sV9Z97-qHPA&t=11s
 
* Upgraded to a Rocna 10 anchor and Mantus anchor guard
https://rocna.com/products/original-rocna/
https://www.mantusmarine.com/product/anchorguard-port-for-br1-bow-roller/
magazine rack: https://amzn.to/3lJuzvr
helm box: https://amzn.to/3AuOen8

**IF YOU HAVEN'T SUBSCRIBED ALREADY PLEASE DO** as it really helps us out**
and to those that have already subscribed, we appreciate you and thank you so much for watching.

Stay tuned for more Channel Surfing........

FOLLOW US ON:
Instagram:
https://www.instagram.com/lets_go_channel_surfing/

Facebook:
https://www.facebook.com/ChannelSurfing
https://www.facebook.com/groups/rangertug27outboard/

Check out our website: letsgochannelsurfing.com
Contact us by Email: channelsurfing@nethkin.net
By mail:
Channel Surfing
1429 Avenue D
PMB 322
Snohomish, WA 98290
DISCLAIMER: Some links mentioned may be affiliate links. If you purchase a product with the links that I provide I may receive a small commission. (no additional charge to you). Thank you so much for your support & we hope you find some helpful tips on our channel.

Видео UPGRADES AND WARRANTY WORK ON OUR RANGER TUG R27OB "CHANNEL SURFING"/ What upgrades did we do? канала Let's go channel surfing