DIY 3D Printing Filament with the Filabot #3DPrinting #Adafruit

In this guide you'll learn about recycling failed prints to create DIY filament: https://learn.adafruit.com/diy-3d-printing-filament/

It's all about sustainable 3d printing. recycling parts to make new filaments saves money, and reduces waste.

Filament extruders like the filabot, grind plastic mulch and extrude it out making recycled filament.

Before we can start, we’ll need to break down the parts. We can crush them down with a rubber mallet and use a canvas bag to keep pieces from going everywhere.

-----------------------------------------
Visit the Adafruit shop online - http://www.adafruit.com

Subscribe to Adafruit on YouTube: http://adafru.it/subscribe

Join our weekly Show & Tell on G+ Hangouts On Air: http://adafru.it/showtell

Watch our latest project videos: http://adafru.it/latest

New tutorials on the Adafruit Learning System: http://learn.adafruit.com/

Music by Noe Ruiz: http://soundcloud.com/ecken
-----------------------------------------

Видео DIY 3D Printing Filament with the Filabot #3DPrinting #Adafruit канала Adafruit Industries