Slanetrac HC150 180 Mini Digger Hedgetrimmer-Hedgecutter
The HC Series of Hedge Cutters is a range of hedge cutters for mini diggers from 0.8 ton to 7.5 ton.
Available in 1.5m and 1.8m options there is a hedge cutter to suit a wide range of machines. These robust low maintenance hedge cutters with there individually replaceable cutting sections come supplied with adjustable mounting brackets to suit your particular machine and hydraulic pipes to connect to your machines rock breaker lines for fast effortless installation.
The hydraulically powered reciprocating finger bar allows for fast and neat cutting of hedges. For best results while heavy cutting the operator can use the slewing movement of the digger to cut through thick heavy growth, while for finer, lighter breasting of the hedge the operator can use the tracking movement to get the desired finish.
Designed to allow cutting to take place at any angle between horizontal and vertical via the adjustable mounting bracket it allows the operator better access to those hard to get places like behind fences and allows the operator to cut close to and around obstacles such as telephone poles offering greater versatility compared to flail options.
With a cutting thickness of up to 40mm the HC Series offers clean cuts allowing for neat tidy hedges with more satisfactory conditions for re-growth compared to flail cutting attachments as well as ensuring minimum disturbance for wild life.
Видео Slanetrac HC150 180 Mini Digger Hedgetrimmer-Hedgecutter канала Slanetrac
Available in 1.5m and 1.8m options there is a hedge cutter to suit a wide range of machines. These robust low maintenance hedge cutters with there individually replaceable cutting sections come supplied with adjustable mounting brackets to suit your particular machine and hydraulic pipes to connect to your machines rock breaker lines for fast effortless installation.
The hydraulically powered reciprocating finger bar allows for fast and neat cutting of hedges. For best results while heavy cutting the operator can use the slewing movement of the digger to cut through thick heavy growth, while for finer, lighter breasting of the hedge the operator can use the tracking movement to get the desired finish.
Designed to allow cutting to take place at any angle between horizontal and vertical via the adjustable mounting bracket it allows the operator better access to those hard to get places like behind fences and allows the operator to cut close to and around obstacles such as telephone poles offering greater versatility compared to flail options.
With a cutting thickness of up to 40mm the HC Series offers clean cuts allowing for neat tidy hedges with more satisfactory conditions for re-growth compared to flail cutting attachments as well as ensuring minimum disturbance for wild life.
Видео Slanetrac HC150 180 Mini Digger Hedgetrimmer-Hedgecutter канала Slanetrac
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Amazing Grass Cutting Machines And Ingenious ToolsForestry Mulcher Clearing Land Fecon fmx36SNAKE POND FROM HELL! Mulching 2000 Feet Of Pond Bank With MTL XC5Becx HS131HR met opvang (test)The Worst Excavator Recovery Of My CareerElkær Termit 1300 Hækkeklipper / Hedge Cutter / HeckenschereBecx heggensnoeier HS130HR hedgecutterForestry Mulching Overgrown HedgePrésentation Taille Haie sur PelleWorld's Extreme Logging Truck Haul Cedar Operator Skill, Heavy Equipment Truck Loading Climbing WorkHedgecutting EXCAVATOR STYLEHC150 Finger bar Hedge Cutter ExcavatorMy homemade Hedge-Cutter - "Hekkner v1.0" 😎Gyrobroyeur,épareuse Débroussailleuse FH 100 SLANETRACWorld Dangerous Dump Truck Operator Skill - Biggest Heavy Equipment Machines WorkingHydraulic Excavator Attachments | Hedge Cutting | GreenTecMecalac 12MTX GreenJob rotary hedge cutterChinese Hydraulic Hedge Trimmer Junk or NotSwivil Trim Hedgecutter Attachment for Tractor Front LoadersFH-80 Flail Cut