DIY Sink Portable Bucket Sink Electric AND Manual!

Made a portable sink for tailgating, picnics or camping!
Most of the materials were scraps from other projects but should still be relatively cheap and has much room for modifications that can work for your individual needs!
I put it together in 15 Minutes. I did not film the process because I usually just experiment with things and have no clue if they will work!
Just take a trip to the local home improvement store and check out the PVC fittings that may work for you and modify it to fit your needs!
LESSONS LEARNED:
1) Instead of using a drain hose for the dirty water, I would instead use a TWO BUCKET system (One for dirty water and One for Clean). This is just because the hose would get kinked sometimes and the water would not drain from the bowl well. It still worked but it was annoying to empty the bowl and unkink the hose. Simply put the clean water bucket at the bottom with a lid on top. then stack an empty bucket with the sink on top and use that to collect the dirty water without using the vinyl tubing.

2) I wouldn't use the tennis ball/hinge/plywood foot pump mechanism. I only kept the bottom plywood that I screwed the hand pump on. It is much easier to just pump it directly on the bulb.
3) If you decide to make it a manual + Electric option, then you will need to buy a Y-Connector-type of PVC fitting. You will need to clamp off whichever system you are NOT using, in order to have adequate water flow.
Tools Needed:
3/4" Drill Bit (For the vinyl tubing to enter and exit the bucket)
1/4" Drill Bit (For making holes on the PVC endcap for the water to pour out more distributed)
Drill
PVC Pipe cutting tool (you can also use a hand saw, jigsaw, hack saw, etc)
Silicone for sealing and joining the "Sink Bowl" and bucket lid
1/2" Vinyl Tubing (could be a different size)
3/4" PVC Pipe (Length varies depending on your needs)
3/4" PVC Elbows (# varies depending on your individual needs)
3/4" PVC End Cap
3/4" PVC Couplings for the sink drain
Something to use as a "Sink Bowl" (I used an old Dog Bowl)
Two 5 Gallon Buckets with Lid
Aquarium pump for the electric option (not required)
https://www.amazon.com/gp/product/B07S5HG869/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 {$13.98}

5 Gallon Bucket {~$3.00}

1/2" Vinyl Tubing (I had it leftover from a different project)
https://www.amazon.com/TotalPond-Vinyl-Tubing-1-2-inch/dp/B004DL0Y9O/ref=pd_bxgy_199_2/138-3953730-4126864?_encoding=UTF8&pd_rd_i=B004DL0Y9O&pd_rd_r=88b7fa1d-9851-41c7-8cdd-832e81a75079&pd_rd_w=mPoUJ&pd_rd_wg=SztLK&pf_rd_p=09627863-9889-4290-b90a-5e9f86682449&pf_rd_r=XP85M650GTAB24M6B2FS&psc=1&refRID=XP85M650GTAB24M6B2FS {$10.16}
Bulb Hand Vaccum Pump
https://www.amazon.com/gp/product/B06W2GVDR1/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 {$7.99}

Видео DIY Sink Portable Bucket Sink Electric AND Manual! канала Making Junk