Tig Welding with a HTP Tig Welder and using the "Rule of 33"
http://weldmongerstore.com/
http://www.weldingtipsandtricks.com/htp-tig-welder-pulse.html
High Speed pulse Tig welding has all kinds of applications. Trial and error is fine but the Rule of 33 is a great place to start. 33 pps, 33% on time, and 33% background current helps limit heat input, is great for welding gaps, and welding near an edge.
Видео Tig Welding with a HTP Tig Welder and using the "Rule of 33" канала weldingtipsandtricks
http://www.weldingtipsandtricks.com/htp-tig-welder-pulse.html
High Speed pulse Tig welding has all kinds of applications. Trial and error is fine but the Rule of 33 is a great place to start. 33 pps, 33% on time, and 33% background current helps limit heat input, is great for welding gaps, and welding near an edge.
Видео Tig Welding with a HTP Tig Welder and using the "Rule of 33" канала weldingtipsandtricks
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Reading the Puddle for Full Pen on Aluminum Butt JointsPrimeWeld TIG225X 2T and 4T Settings - Switch vs Foot PedalAerospace TIG Practice and a Hack FixtureCK WorldWide MT200 AC/DC TIG WelderTIG Pulse Settings for Edge Beads and MoreMIG Welding Settings and Techniques Tested - PrimeWeld MIG180PrimeWeld MIG 180 Wire Speed SettingsPrimeWeld TIG Cooler115 Volt MIG Welding Techniques & SettingsWhat is Autogenous Welding? 3 ExamplesTIG Welding Aluminum Intake - part1 of 3MIG vs Mill ScaleTig Welding and Stick Welding Garage Door FixTig Welding Stainless Steel to High Strength SteelStick Welding Overhead 4f Multi Pass Tee 7018TIG Welding Aluminum with a Gas LensTig Welding Aluminum with Ar/He Mix part2Silicon Bronze on Blackened SteelAluminum TIG Welding -2 Applications for Frequency settingsDIY Welding Prop Compared to Store-boughtWelding with a Large Gas Lens