Monoprice MP10 3d Printer the Good and the Bad
The Monoprice MP10 is an aggressively priced large print bed 3d printer with a range of exciting features. My earlier review of this printer left me unclear about my recommendation.
After upgrading the extruder and fine-tuning the Cura profile, I now have a good feeling for where this printer fits and who can benefit from it. Watch this video to learn from my mistakes and experiences with this 300mm x 300mm x 400mm Creality CR10 clone.
The following Google slide deck contains all of my recommended Cura profile settings.
https://docs.google.com/presentation/d/10Two5vMClDXDwZXuJUp7YF1bjKibKQVjw1eilUuuLaY/edit?usp=sharing
Enjoy
Irv
---
The following links are to products I have used, reviewed, or evaluated for the MakeWithTech community. Some of the links below are affiliate links that provide commissions, at no cost to you, and help support the MakeWithTech video production, purchase of products for reviews, lab, forum, and web site.
I have reviewed the following printers or similar printers:
➡︎ https://kit.co/makewithtech/3d-printers-reviewed-on-drvax-youtube-channel
These are some of the tools I use for 3d printing day-to-day:
➡︎ https://kit.co/makewithtech/basic-3d-printing-tools
I have reviewed or used the following 3d printer upgrades:
➡︎ https://kit.co/makewithtech/3d-printer-upgrades
Here are the 3d printer filaments I use to evaluate prints, software, and techniques:
➡︎ https://kit.co/makewithtech/3d-printing-filament-i-use-at-drvax
I will be covering basic electronics and software in future MakeWithTech segments and here are the products I am using:
https://kit.co/makewithtech/software-and-electronic-kits
Some of the Woodworking products I use:
https://kit.co/makewithtech/drvax-woodworking-tools-and-supplies
---
** Affiliate disclaimer: some of the above links in my videos may be affiliate links, which generate a sales commission for me. Your price is the same or less than if you go to the site directly. These sales commissions help to support the MakeWithTech channel. (https://makewithtech.com)
** MakeWithTech and the MakeWithTech videos are Copyright Cogitations, LLC. (https://cogitations.com)
** Equipment used in the MakeWithTech videos has the potential to cause injury if misused. Use all equipment and tools at your own risk and follow all manufacturer's safety recommendations.
** Cogitations, LLC licenses all music used in the MakeWithTech videos from Epidemic Sound. Cogitations, LLC uses only authorized or open source clip art and third party images. Images .
Видео Monoprice MP10 3d Printer the Good and the Bad канала Make With Tech (MakeWithTech)
After upgrading the extruder and fine-tuning the Cura profile, I now have a good feeling for where this printer fits and who can benefit from it. Watch this video to learn from my mistakes and experiences with this 300mm x 300mm x 400mm Creality CR10 clone.
The following Google slide deck contains all of my recommended Cura profile settings.
https://docs.google.com/presentation/d/10Two5vMClDXDwZXuJUp7YF1bjKibKQVjw1eilUuuLaY/edit?usp=sharing
Enjoy
Irv
---
The following links are to products I have used, reviewed, or evaluated for the MakeWithTech community. Some of the links below are affiliate links that provide commissions, at no cost to you, and help support the MakeWithTech video production, purchase of products for reviews, lab, forum, and web site.
I have reviewed the following printers or similar printers:
➡︎ https://kit.co/makewithtech/3d-printers-reviewed-on-drvax-youtube-channel
These are some of the tools I use for 3d printing day-to-day:
➡︎ https://kit.co/makewithtech/basic-3d-printing-tools
I have reviewed or used the following 3d printer upgrades:
➡︎ https://kit.co/makewithtech/3d-printer-upgrades
Here are the 3d printer filaments I use to evaluate prints, software, and techniques:
➡︎ https://kit.co/makewithtech/3d-printing-filament-i-use-at-drvax
I will be covering basic electronics and software in future MakeWithTech segments and here are the products I am using:
https://kit.co/makewithtech/software-and-electronic-kits
Some of the Woodworking products I use:
https://kit.co/makewithtech/drvax-woodworking-tools-and-supplies
---
** Affiliate disclaimer: some of the above links in my videos may be affiliate links, which generate a sales commission for me. Your price is the same or less than if you go to the site directly. These sales commissions help to support the MakeWithTech channel. (https://makewithtech.com)
** MakeWithTech and the MakeWithTech videos are Copyright Cogitations, LLC. (https://cogitations.com)
** Equipment used in the MakeWithTech videos has the potential to cause injury if misused. Use all equipment and tools at your own risk and follow all manufacturer's safety recommendations.
** Cogitations, LLC licenses all music used in the MakeWithTech videos from Epidemic Sound. Cogitations, LLC uses only authorized or open source clip art and third party images. Images .
Видео Monoprice MP10 3d Printer the Good and the Bad канала Make With Tech (MakeWithTech)
Показать
Комментарии отсутствуют
Информация о видео
13 февраля 2019 г. 4:43:41
00:18:07
Другие видео канала
Upgrading to a Metal Extruder on a Bowden Style 3d PrinterAwesome 3D Prints on the Monoprice MP10 3D Printer (octolapse timelapse)MonoPrice MP10 UNBOXING | SETUP | PRINTING - Budget Machine!Make Money 3D Printing in 2021 | Over $100K Per YearMonoprice MP10 3d Printer Quality ReviewMP 10 / MP 10 Mini 3D Printer Introduction and SetupMonoprice MP10 Unboxing Setup First PrintBest $200 3d Printer: Monoprice Select Mini vs Mini DeltaMonoprice Maker Pro 10 Mini - Part 2 - Let's Print!Dont buy an Ender 3 or Prusa 3D Printer until you watch this video!Creality Ender 5 3D printer review - Upgrades, fixes and Initial thoughtsShould You Buy a Prusa 3d Printer?My new favorite 3D Printer! The Voron 2.4 Build ExperienceIn 2021 Should You Buy a Creality 3d Printer?Is the Monoprice Mini Delta your first 3d printer?Unique 3d Printed Objects3d Printing with a $180 Printer. Monoprice Select Mini (v2).4 Vase Mode Techniques Compared; How to use Cura for Vase PrintsTop 5 Web Sites for Useful 3d Printer Designs