Making BB-8 (v2) - Improving the Head - Part 7
In part 7 of how to make a BB-8 I work on the head being heavier than I'd like, so much that it affects performance. I change the way the head support structure attaches so that I can lighten it, and then I hack away at it to make it lighter. I swap the 2000mAh battery for a lighter 150mAh one. And I replace the deodorant ball casters with much better, but still fairly lightweight, Pololu casters.
This video was made possible in part by these Patreon supporters:
Jonathan Rieke
Printable Science
Support RimstarOrg on Patreon https://www.patreon.com/user?u=680159
or make a one-time donation at http://rimstar.org/donate_support_rimstarorg.htm
Subscribe so that you don't miss new videos as they come out http://www.youtube.com/user/rimstarorg?sub_confirmation=1
Go to the main channel page here https://youtube.com/rimstarorg
The Pololu casters used are these ones:
https://www.pololu.com/product/2691
See also:
Making BB-8 (v2) - Adding HC-05 Bluetooth RC - Part 6
https://www.youtube.com/watch?v=5EuI9lBtC3I&list=PLFsZmHTZL-zmztc_P7h2tqLxKJHu0vH1e
Ball Bearing Motor - How to Make/How it Works
https://www.youtube.com/watch?v=DjKhggNJGls&list=PLFsZmHTZL-zmfXxstlxuJgRE9bOGobEVu
Follow behind-the-scenes on:
Twitter https://twitter.com/#!/RimStarz
Google+ https://plus.google.com/116395125136223897621
Facebook https://www.facebook.com/rimstarorg
http://rimstar.org
Sound effects: http://www.freesound.org licensed under the Creative Commons 0 License.
Видео Making BB-8 (v2) - Improving the Head - Part 7 канала RimstarOrg
This video was made possible in part by these Patreon supporters:
Jonathan Rieke
Printable Science
Support RimstarOrg on Patreon https://www.patreon.com/user?u=680159
or make a one-time donation at http://rimstar.org/donate_support_rimstarorg.htm
Subscribe so that you don't miss new videos as they come out http://www.youtube.com/user/rimstarorg?sub_confirmation=1
Go to the main channel page here https://youtube.com/rimstarorg
The Pololu casters used are these ones:
https://www.pololu.com/product/2691
See also:
Making BB-8 (v2) - Adding HC-05 Bluetooth RC - Part 6
https://www.youtube.com/watch?v=5EuI9lBtC3I&list=PLFsZmHTZL-zmztc_P7h2tqLxKJHu0vH1e
Ball Bearing Motor - How to Make/How it Works
https://www.youtube.com/watch?v=DjKhggNJGls&list=PLFsZmHTZL-zmfXxstlxuJgRE9bOGobEVu
Follow behind-the-scenes on:
Twitter https://twitter.com/#!/RimStarz
Google+ https://plus.google.com/116395125136223897621
Facebook https://www.facebook.com/rimstarorg
http://rimstar.org
Sound effects: http://www.freesound.org licensed under the Creative Commons 0 License.
Видео Making BB-8 (v2) - Improving the Head - Part 7 канала RimstarOrg
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Behind the Scenes at RimstarOrg as Thx for 1 Million Views10,000 Subscribers Thx - Ionocraft, Electret, Joule Thief, and MoreRain Water Toilets Net Zero Energy Vincent Massey Park Service PavilionDirecting Light with Water and Plastic - Science ShortShadow wars/solar site survey Shade Finder toolCone solar cooker part 2 - I start with a bowlLaser Communicator - DIY/HomemadeStirling Engine Powered by Fresnel Lens/Concentrated Solar PowerLifter Voltage/Current and Smoke/Airflow Test MeasurementsPowering Corona Motor with Triboelectric EffectCar sunshade solar cooker windshieldSunflower Heat Engine in Sunlight/How it WorksCurie Temperature/Point Experiment in Ferromagnetism - Science ShortBB-8 Droid Build (v1) from Star Wars - HomemadeMake Ionocraft/Ion Wind Spinning DisksHow to Make Inchworm using Nitinol Wire/Shape Memory AlloyHow to test Rochelle salt piezoelectric crystals voltage oscilloscopeHow to Make Flat Capacitors for Tesla Coil (Small SGTC)Hand-Cranked Laser - TEA Laser Powered by Wimshurst MachineHow to Make a Corona Motor (v1/simple) or Electrostatic motor/Atmospheric motorMaker Hand Tools - Favorites