Metal Spinning and how to do it without, well, almost without any skill Part 1
I was asked to make some baffles to fit a Suzuki 750 exhaust and not wanting to make a press tool I made a metal spinning roller tool instead. In the video you will see me making the first forming of the baffles, now you must realise this is not proper spinning which requires more than a little skill, but the result is just the same. In part 2 there will be a closer view of the action.
NB this is mild steel that is being spun, so no annealing was required, brass or copper almost certainly would need to be.
Видео Metal Spinning and how to do it without, well, almost without any skill Part 1 канала Chris Stephens
NB this is mild steel that is being spun, so no annealing was required, brass or copper almost certainly would need to be.
Видео Metal Spinning and how to do it without, well, almost without any skill Part 1 канала Chris Stephens
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
![Screw thread cutting, so you think you know an easy way......](https://i.ytimg.com/vi/4cky2TXmU4Y/default.jpg)
![feeding badgers is the new in thing.](https://i.ytimg.com/vi/BMFnSouHzqY/default.jpg)
![Badger having his supper in the garden 28 January 2019](https://i.ytimg.com/vi/OxDVSgqgDic/default.jpg)
![Showing one advantage of an Offen Vee block](https://i.ytimg.com/vi/eaT5fuwNebI/default.jpg)
![BMW motorcycle gearbox end cover resleeve](https://i.ytimg.com/vi/ew4zfkzX72k/default.jpg)
![One of my very spoilt badgers being picky.](https://i.ytimg.com/vi/SILY5YQ0mRk/default.jpg)
![Trapezoidal threading tool jig from September 2018,](https://i.ytimg.com/vi/TMD_s1mfB0s/default.jpg)
![Fox visits the garden 18,05,2017](https://i.ytimg.com/vi/dpM_KDnRgWM/default.jpg)
![A custom made motorcycle gear lever](https://i.ytimg.com/vi/TQpw3bKniy8/default.jpg)
![Foxy having his lunch, March 2018](https://i.ytimg.com/vi/LkViPMFgmQw/default.jpg)
![Graduated hand wheel on Bantam lathe](https://i.ytimg.com/vi/xkrA_ybdfeI/default.jpg)
![Rectangular section springs](https://i.ytimg.com/vi/S9JEYXItdeA/default.jpg)
![Badger hand feeding](https://i.ytimg.com/vi/eCrwIkJ2928/default.jpg)
![Low profile micro adjust levelling jacks](https://i.ytimg.com/vi/8tXD1NeVf-I/default.jpg)
![Badger hand feeding, at last film of hand feeding.](https://i.ytimg.com/vi/2EVG-07n_cU/default.jpg)
![A copy of an Offen Vee block](https://i.ytimg.com/vi/h9qm7Qythrk/default.jpg)
![Badger hand feeding](https://i.ytimg.com/vi/u8dfwLvHfQo/default.jpg)
![Part three of BMW exhaust job](https://i.ytimg.com/vi/_5lqDdDcbU8/default.jpg)
![.A little video reply for Tom Lipton](https://i.ytimg.com/vi/TZHu_S685Tc/default.jpg)
![Part four and final BMW exhaust job](https://i.ytimg.com/vi/W581h7C9lzM/default.jpg)
![Part two of the BMW Boxer exhaust job](https://i.ytimg.com/vi/y5JUVBVupck/default.jpg)