DIY 4G63 TURBO LOG MANIFOLD! used $100 fluxcore 110v harbor freight welder

welcome to another GARAGELESS video...
enjoy, like, comment and subscribe...
Share is also greatly appreciated!

INSTAGRAM #garage_less

deathtrap fiero build:
*modified 89 dodge daytona louvers
*custom quarter panels
*3400 la1
*COMP 26918 VALVE SPRINGS- https://www.wot-tech.com/comp-26918-valve-springs.html
*STAGE 2 TURBO COMP CAM- https://www.wot-tech.com/stage-2-turbo-cam.html
*WIDE CAM BEARINGS- https://www.wot-tech.com/wide-cam-bearings.html
*VALVE SPRING SEATS FOR LS1 SPRINGS- https://www.wot-tech.com/spring-seats-for-ls-springs.html
*XTD STAGE 3 CLUTCH
*EBAY TURBO .50 A/R COMPRESSOR/.63 A/R TURBINE
*EBAY 44MM EXTERNAL WASTEGATE
*SELF TUNED USING HPTUNERS PRO- https://www.wot-tech.com/hptuners-vcm-suite.html
*custom partial tube chassis in rear
*Cut springs in front
*custom coilovers in rear(7inch sleeves, 350# springs)
*arc ar1 17x8.5 30mm offset wheels
*cx racing water to air intercooler, heat exchanger and water pump
*cree u5 headlights
*wired from scratch
*and lots more...

CONQUEST build...
* Block: mighty max 4g64 august 1991
* Body: 1987 Chrysler Conquest
* Boost control: MAC 3 port solenoid
* Cam Gears: Works Engineering
* Cam Gear Bolt: ARP
* Camshaft: Brian Crower Stage 2 (BC0101)
* Clutch: Spec
* Clutch Bolts: ARP
* Coil Pack: Volkswagen wasted spark (98-01 Beetle 2.0L)
* Coolant Sensor: GM 2-wire sensor
* ECU: Microsquirt v3
* Exhaust Manifold: Equal length Evo 8/9 T3 with external wastegate (flipped and extended)
* Flex Fuel sensor: GM
* Flywheel: Fidanza
* Flywheel Bolts: ARP (pre 92')
* Fuel Pump: 300LPH Universal External
* Head: 1G Big Port 4g63 DOHC
* Head Gasket: Cometic MLS (87mm bore, 0.51" height)
* Head Studs: ARP 4g63 6-Bolt
* Injectors: 1000cc (03-08 Evo)
* Intake Manifold: Evo 4-9 with 80mm throttle body (modified)
* Main Bearings: ACL standard High Performance
* MAP sensor: GM 3 Bar
* Pistons: Manley Pistons (For 95-99 4g64 w/ 4g63 Head 86.5mm bore)
* Radiator: J2 2-Row aluminum (89-94 240sx)
* Rods: Eagle H Beams (For 6-Bolt using 7-Bolt Pistons 22mm pin)
* Rod Bearings: ACL Race Rod Bearings (6-Bolt 89-92)
* Shifter: Mk1 short throw
* Spark plug wires: 98-01 Volkswagen Beetle
* Timing Belt: 1994 Galant 2.4 DOHC belt
* Transmission: km132 (stock conquest 5-speed)
* Turbo: GT3076 Ebay turbo
* Valve Spring: Brian Crower BC1100
* Valve Spring seats: OEM
* Valve stems: Supertech Viton
* Wastegate: 44mm ebay
suggestions on making better content is always welcome...
Music provided by Argofox:
Ghost'n'Ghost - Lighthouse
https://youtu.be/xVzeZGRZk0s

Видео DIY 4G63 TURBO LOG MANIFOLD! used $100 fluxcore 110v harbor freight welder канала Garageless