3090 FE Thermal Pad Mod (-20°C) | Improve your mining hashrate!
In this video, I'll show you step by step how to replace the thermal pad of the 3090 FE, including a complete teardown and the dimensions of each pad to cut. You'll see the drop in temperature and increase in Ethereum hashrate after the mod at the end of the video.
Go check my other video focused on how to unplug the details: https://www.youtube.com/watch?v=X5a8EbhVYSI
N.B: I'm aware that I did touch the pads with my fingers in the video which you should generally avoid doing but what you don't see is that I actually clean my fingers between each shots.
Also, you should also change the thermal paste on the GPU. I didn't receive mine in time to make the video.
If this video helped you, consider subscribing to help me out 🙂
Toolbox: https://amzn.to/3faGKy6 or https://amzn.to/2QJU0Qd
Thermal pad: https://amzn.to/3clwAsD (ATTENTION: choose 1.5mm!) or https://amzn.to/3fjSJJE
Thermal paste: https://amzn.to/3clB6aC or https://amzn.to/3cppd3n
Cleansing Wipes for thermal paste: https://amzn.to/3spaPxr
Noctua thermal paste with cleansing wipes: https://amzn.to/31mb5le
The thermal pad mod for the 3080 FE is largely similar.
Credit to "Steve" from Gamers Nexus, "falkentyne" from Reddit and "AwkwaBear" from Overclockers.net for instructions.
Chapters
00:00 - Intro
02:22 - Temps before mod
05:19 - Heat sink and fan
05:26 - Tools needed
06:47 - Removing the triangle
07:19 - Unscrewing the Phillips
08:06 - Removing the little covers
09:08 - Unscrewing the Torx
09:54 - Removing the backplate
10:15 - Unplugging the cables
11:36 - Removing the IO shield
12:40 - Removing the last piece
13:37 - Remove the PCB
14:19 - Cleaning the memory modules
14:47 - Front PCB diagram
15:01 - Cutting the thermal pad
15:38 - Installing the thermal pad (front)
17:00 - Back PCB
17:23 - Back PCB diagram
17:40 - Thermal pad applied (back)
18:03 - Putting back the PCB
20:18 - Plugging back the cables
21:24 - Putting back the IO shield
22:02 - Putting back the backplate
22:40 - Screwing back the Torx
23:14 - Putting back the little covers
23:58 - Screwing back the Phillips
24:15 - Putting back the triangle
24:31 - Temps after one day
25:25 - Outro
_________________________________________________________
As an Amazon Associate I earn from qualifying purchases.
Видео 3090 FE Thermal Pad Mod (-20°C) | Improve your mining hashrate! канала CryptoAtHome
Go check my other video focused on how to unplug the details: https://www.youtube.com/watch?v=X5a8EbhVYSI
N.B: I'm aware that I did touch the pads with my fingers in the video which you should generally avoid doing but what you don't see is that I actually clean my fingers between each shots.
Also, you should also change the thermal paste on the GPU. I didn't receive mine in time to make the video.
If this video helped you, consider subscribing to help me out 🙂
Toolbox: https://amzn.to/3faGKy6 or https://amzn.to/2QJU0Qd
Thermal pad: https://amzn.to/3clwAsD (ATTENTION: choose 1.5mm!) or https://amzn.to/3fjSJJE
Thermal paste: https://amzn.to/3clB6aC or https://amzn.to/3cppd3n
Cleansing Wipes for thermal paste: https://amzn.to/3spaPxr
Noctua thermal paste with cleansing wipes: https://amzn.to/31mb5le
The thermal pad mod for the 3080 FE is largely similar.
Credit to "Steve" from Gamers Nexus, "falkentyne" from Reddit and "AwkwaBear" from Overclockers.net for instructions.
Chapters
00:00 - Intro
02:22 - Temps before mod
05:19 - Heat sink and fan
05:26 - Tools needed
06:47 - Removing the triangle
07:19 - Unscrewing the Phillips
08:06 - Removing the little covers
09:08 - Unscrewing the Torx
09:54 - Removing the backplate
10:15 - Unplugging the cables
11:36 - Removing the IO shield
12:40 - Removing the last piece
13:37 - Remove the PCB
14:19 - Cleaning the memory modules
14:47 - Front PCB diagram
15:01 - Cutting the thermal pad
15:38 - Installing the thermal pad (front)
17:00 - Back PCB
17:23 - Back PCB diagram
17:40 - Thermal pad applied (back)
18:03 - Putting back the PCB
20:18 - Plugging back the cables
21:24 - Putting back the IO shield
22:02 - Putting back the backplate
22:40 - Screwing back the Torx
23:14 - Putting back the little covers
23:58 - Screwing back the Phillips
24:15 - Putting back the triangle
24:31 - Temps after one day
25:25 - Outro
_________________________________________________________
As an Amazon Associate I earn from qualifying purchases.
Видео 3090 FE Thermal Pad Mod (-20°C) | Improve your mining hashrate! канала CryptoAtHome
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
We Found the Glue: Tear-Down of NVIDIA RTX 3090 Founders EditionRTX 3080 Thermal Pad Install & Ethereum TestingDrop your RTX 3090 Ethereum mining memory temps with this easy thermal pad modHow to Replace Thermal Pads on Any GPU!Aorus 3080 Extreme - upgrading thermal padsRTX 3090 Initial Run and Cooling Memory TempsHow to unplug the 3090 FE cablesAdd more PCIe slots to your mining motherboardGeForce RTX 3090 $3000 Graphics Card No Display RepairRTX 3080 / 3090 Undervolting | 100W Less = Same Performance?3080 Upgrade - adding memory thermal pads for 30% more hash rateGigabyte RTX 3080 Thermal Pads Replacement & UpgradeTurning old jewelry into pure gold barsThermal Pads vs Thermal Paste - Don't try this!This Sounds Too Good to be True - God-Tier Thermal PadBut how does bitcoin actually work?3090 FE Watercooling! With the Bitspower BP-VG3090FERTX 3080 Temperature Testing... Not the result we expectedRebtech 8 GPU All In One Mining MOTHERBOARD!Tear-Down: NVIDIA RTX 3070 Founders Edition Disassembly