ACMER S2 Pro 48W Laser Engraver Unboxing Setup and Real material test

In this video I unbox and set up the ACMER S2 Pro 48W Laser Engraver and put it straight to work with real material tests. This 48W diode laser is the highest output diode laser I have personally tested so far, and it is a serious step up from the entry level S2.

The Acmer S2 Pro is designed for users who want higher power, faster cutting, and better overall stability. The 48W output, upgraded X and Y axis, and machine controlled air assist make it a better choice for makers, workshops, and small businesses that work with thicker materials or run more frequent and demanding jobs.

The Acmer S2 is more budget friendly and ideal for beginners and hobby users who are mainly focused on engraving and light cutting. It is well suited if you are just getting started or only use a laser occasionally on thinner materials.

I test the S2 Pro on a range of real materials so you can see what this 48W diode laser can actually do in practical use, not just on paper.

👉 Discount code for viewers
BCreviews2pro – 15 percent off
Valid on eu.acmerlaser.com and acmerlaser.com
Link to the ACMER S2 PRO https://eu.acmerlaser.com/products/acmer-s2-pro-laser-engraver?ref=alwfqoik

My next video will be a full DIY laser enclosure build plus adding a camera for LightBurn, so make sure you are subscribed if you want to see that.

Thanks for watching and feel free to drop any questions in the comments.

0:00 Intro
00:50 Unboxing
07:31 First cut 2.5mm wood
09:58 First slate engraving (testing settings)
10:43 Slate engraving using precision mode (25W)
13:53 Engrave and cut Greatcrave scratch acrylic sheet
16:24 5mm construction grade ply wood
17:51 12mm construction grade ply wood
19:38 Stainless steel engraving
21:25 Black aluminium business card
22:07 Conclusion

Видео ACMER S2 Pro 48W Laser Engraver Unboxing Setup and Real material test канала Benson Chik