A True Machinist Made Giant Rear Suspension Trunnion Shaft | Making and Fitting Trunnion Suspension

In vehicles. In older cars, the trunnion is part of the suspension and either allows free movement of the rear wheel hub in relation to the chassis or allows the front wheel hub to rotate with the steering.

Trunnions- also called outriggers or trunnion outriggers - are load-bearing platforms welded to the outsides of the rear frame beams between the 1st/2nd and 2nd/3rd axles of many ROGERS trailers.

Watch this video to learn how trunnion shaft are made. This video is about rear axle trunnion shaft manufacturing, and you'll learn about the different parts of a trunnion axle shaft, as well as the manufacturing process.
If you're looking to buy a trunnion shaft , then this video is for you. You'll also get a chance to see how a rear suspension trunnion shaft is made, from start to finish. So watch this video and learn all you need to know about trunnion rear suspension.

Trunnions are precision ground bearing mounts that allow you to mount a fixture to the surface, usually on a riser, and will allow full rotation of the fixture and parts placed on it. This is ideal for use when you need maximum access to both the top, bottom, and sides of the part.

A True Machinist Made Giant Rear Suspension Trunnion Shaft | Making and Fitting Trunnion Suspension

To raise the drum in the discharge breaching simply move the trunnions at that end of the drum closer together. To lower it move them apart. When the vertical height is correct, but the drum is off-center to one side or the other we must move both trunnions in the same direction while maintaining their spacing.

#trunnionshaft
#rearsuspensiontrunnion
#trucktrunnionshaft
#rearaxletrunnionsuspension
#pakistanitruck
#wonderingskills

Видео A True Machinist Made Giant Rear Suspension Trunnion Shaft | Making and Fitting Trunnion Suspension канала Wondering Skills