HVAC in the house...no, the shop | RATTLECAN FAB SHOP with James O'Rear
HVAC in the house...no, the shop | RATTLECAN FAB SHOP with James O'Rear
After years (literally) of planning and saving we finally get the big update to the shop: heating, ventilation and air conditioning commonly known as HVAC. Our oldest son is in the HVAC field and he was able to help us source and install the system.
The old unit it is replacing is an air handler that had the air conditioning coil removed (so it was most likely used when installed into the shop 17 years ago) and only had the 15KW strip heating element. We decided to keep the existing duct runs as they were in good working order.
The new unit is a TempStar 2-ton system with a smaller 10KW heating element as we opted to upgrade to the heat pump functionality. Even with the heat pump, you need the strip heater to defrost the condenser during extreme heat pump events (or so I'm told). And since it is for the shop as opposed to our home we went with a SEER 15 rating to help economize the installation.
Media credits:
Livin' Up sting by Otis McDonald
VHS glitch footage is licensed under the Creative Commons — Attribution 4.0 International (CC BY 4.0) courtesy of InCamera.
cut_mister_presley.wav is licensed under the Creative Commons-Attribution 4.0 International (CC BY 4.0) courtesy of sinatra314 via Freesounds.org.
Sparks stock footage provided by Videvo, downloaded from www.videvo.net
Grand Slam by Au.Ra
Видео HVAC in the house...no, the shop | RATTLECAN FAB SHOP with James O'Rear канала Rattlecan Fab Shop
After years (literally) of planning and saving we finally get the big update to the shop: heating, ventilation and air conditioning commonly known as HVAC. Our oldest son is in the HVAC field and he was able to help us source and install the system.
The old unit it is replacing is an air handler that had the air conditioning coil removed (so it was most likely used when installed into the shop 17 years ago) and only had the 15KW strip heating element. We decided to keep the existing duct runs as they were in good working order.
The new unit is a TempStar 2-ton system with a smaller 10KW heating element as we opted to upgrade to the heat pump functionality. Even with the heat pump, you need the strip heater to defrost the condenser during extreme heat pump events (or so I'm told). And since it is for the shop as opposed to our home we went with a SEER 15 rating to help economize the installation.
Media credits:
Livin' Up sting by Otis McDonald
VHS glitch footage is licensed under the Creative Commons — Attribution 4.0 International (CC BY 4.0) courtesy of InCamera.
cut_mister_presley.wav is licensed under the Creative Commons-Attribution 4.0 International (CC BY 4.0) courtesy of sinatra314 via Freesounds.org.
Sparks stock footage provided by Videvo, downloaded from www.videvo.net
Grand Slam by Au.Ra
Видео HVAC in the house...no, the shop | RATTLECAN FAB SHOP with James O'Rear канала Rattlecan Fab Shop
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
SHOP UPDATE JAN2020 | RATTLECAN FAB SHOP with James O'RearSCRAP PROJECT grinder rack pt. 1 | RATTLECAN FAB SHOP with James O'RearNew Skills pt2 informal opportunities | RATTLECAN FAB SHOP with James O'RearDouble-dip trip | RATTLECAN FAB SHOP with James O'RearThis Week at School! ep. 02 | RATTLECAN FAB SHOP with James O'RearFEARLESS Church road sign- detailed| RATTLECAN FAB SHOP with James O'RearLet's Talk: MASKS! | RATTLECAN FAB SHOP with James O'RearFEARLESS Church road sign- quick | RATTLECAN FAB SHOP with James O'RearCLAMPS! | RATTLECAN FAB SHOP with James O'RearCompressor pump replacement | RATTLECAN FAB SHOP with James O'RearThis Week at School! Intro | RATTLECAN FAB SHOP with James O'RearThis Week at School! ep. 04 | RATTLECAN FAB SHOP with James O'RearThis Week at School! ep. 02 | RATTLECAN FAB SHOP with James O'RearPottery Wheel Welding Platform Scrap Build | RATTLECAN FAB SHOP with James O'RearThis Week in School Fall'22 ep FINALS | RATTLECAN FAB SHOP with James O'RearThis Week in School Fall'22 ep09-10 | RATTLECAN FAB SHOP with James O'RearProtecting machined surfaces with the cold blue process | RATTLECAN FAB SHOP with James O'RearThis Week at School ep.5 | RATTLECAN FAB SHOP with James O'RearThis Week in School Fall'22 ep08 | RATTLECAN FAB SHOP with James O'RearPrimeWeld CUT 60 plasma cutter part 1- unboxing and tour | RATTLECAN FAB SHOP with James O'Rear