How to get flat walls for your tile.
How to get flat walls for your tile. I also talk about the difference between a traditional shower system with a referred to as a "water in, water out System" built with vinyl liner three piece drain and cement board, compared a modern "Sealed System" that is built using a Bonding Flange Drain and waterproof Foam Boards.
Having a flat substrate to install your tile to will make the job go faster and give you a better outcome. It is rare to find wall studs that are perfectly aligned and in plane, if you don't shim, fur, sister, or make adjustments and install your Durock, or other wall board directly to the studs, you will end up with a wavy wall with humps and valleys. If you are using a foam board like Schluter Kerdi-Board, there is a quick and easy method to flattening a wa with little effort and no shimming. Schluter allows wetshimming, this will also work for other Foam boards,, however I am not sure whether they approve of it or not, so please check before proceeding. This method is called wet shimming and is the application of a thick bed of adhesive to the studs to compensate for the differences in alignment, then the board is attached to the studs and adjusted to achieve a flat plumb wall.All tile installed by Sal DiBlasi, Elite-tile Company, in the Boston North Shore area. This video contains affiliate links, which means I will receive a small commission if you click on the product link.
SendOwel Link to PDF $1
https://transactions.sendowl.com/orders/24356927/bae4cc1cf98c786b2f0f66f8ff5a1d27/7
👍 Patreon https://www.patreon.com/saldiblasi 👍
🙂My online store https://www.amazon.com/shop/saldiblasi 🙂
▶▶▶Other videos about this bathroom
Installing the Mud
https://www.youtube.com/watch?v=XMD3qzjLxDc&t=1333s
Tile layout
https://youtu.be/eO-epAQ_rtA
Drain Installation
https://youtu.be/zii-zGuLeTc
Waterproofing membrane and Curb
https://youtu.be/WPjR5CBQ3I8
This entire bathroom install Time Lapse
https://www.youtube.com/watch?v=n9Ci2JXTynU&t=458s
YouTube Channel
https://www.youtube.com/user/saldibs
Facebook
https://www.facebook.com/pages/Elite-Tile-Company/56681633342
Website
http://www.elitetileco.com/
Twitter
https://twitter.com/saldiblasi1
Instagram
https://www.instagram.com/saldiblasi1/
National Tile Contractors Association
https://tile-assn.site-ym.com/
👇 Some of my favorite Tools 👇
Float https://amzn.to/2tdEpN2
Rubbing Stone https://amzn.to/2QrgRfh
Notched Trowel 1/4 x 1/4 x 1/4-inch https://amzn.to/36bq5mQ
Notched Trowel 1/2 x 1/2 x 1/2-Inch https://amzn.to/2Q5e90g
Notched Trowel 1/4 x 3/8 x 1/4-Inch https://amzn.to/39j1caB
Super Dust Collector – WaleTale https://amzn.to/2MDuVkK
Black Nitrile Gloves - 6 mil https://amzn.to/2SJQ6FZ
Margin Trowel https://amzn.to/352MYHx
Mortar Mixer https://amzn.to/2ZxYqtF
4in Sandpaper for Stone Polishing https://amzn.to/2ZB2skT
Polishing Rubber Backing Pad https://amzn.to/2srikdy
Montolit 63P3 24 Inch Tile Cutter https://amzn.to/2MDoFtl
DEWALT Wet Tile Saw https://amzn.to/2QqpO8O
Rubi Thinset mixer https://amzn.to/39VmNWV
Opt into NTCA’s VIP Text Messaging program for training opportunities.
Text “NTCA” to 31996 or Visit https://widget.smsinfo.io/v2/ae58812ba684c1dc65550d3349dbc2e6
For Industry Professionals only
Видео How to get flat walls for your tile. канала Sal DiBlasi
Having a flat substrate to install your tile to will make the job go faster and give you a better outcome. It is rare to find wall studs that are perfectly aligned and in plane, if you don't shim, fur, sister, or make adjustments and install your Durock, or other wall board directly to the studs, you will end up with a wavy wall with humps and valleys. If you are using a foam board like Schluter Kerdi-Board, there is a quick and easy method to flattening a wa with little effort and no shimming. Schluter allows wetshimming, this will also work for other Foam boards,, however I am not sure whether they approve of it or not, so please check before proceeding. This method is called wet shimming and is the application of a thick bed of adhesive to the studs to compensate for the differences in alignment, then the board is attached to the studs and adjusted to achieve a flat plumb wall.All tile installed by Sal DiBlasi, Elite-tile Company, in the Boston North Shore area. This video contains affiliate links, which means I will receive a small commission if you click on the product link.
SendOwel Link to PDF $1
https://transactions.sendowl.com/orders/24356927/bae4cc1cf98c786b2f0f66f8ff5a1d27/7
👍 Patreon https://www.patreon.com/saldiblasi 👍
🙂My online store https://www.amazon.com/shop/saldiblasi 🙂
▶▶▶Other videos about this bathroom
Installing the Mud
https://www.youtube.com/watch?v=XMD3qzjLxDc&t=1333s
Tile layout
https://youtu.be/eO-epAQ_rtA
Drain Installation
https://youtu.be/zii-zGuLeTc
Waterproofing membrane and Curb
https://youtu.be/WPjR5CBQ3I8
This entire bathroom install Time Lapse
https://www.youtube.com/watch?v=n9Ci2JXTynU&t=458s
YouTube Channel
https://www.youtube.com/user/saldibs
https://www.facebook.com/pages/Elite-Tile-Company/56681633342
Website
http://www.elitetileco.com/
https://twitter.com/saldiblasi1
https://www.instagram.com/saldiblasi1/
National Tile Contractors Association
https://tile-assn.site-ym.com/
👇 Some of my favorite Tools 👇
Float https://amzn.to/2tdEpN2
Rubbing Stone https://amzn.to/2QrgRfh
Notched Trowel 1/4 x 1/4 x 1/4-inch https://amzn.to/36bq5mQ
Notched Trowel 1/2 x 1/2 x 1/2-Inch https://amzn.to/2Q5e90g
Notched Trowel 1/4 x 3/8 x 1/4-Inch https://amzn.to/39j1caB
Super Dust Collector – WaleTale https://amzn.to/2MDuVkK
Black Nitrile Gloves - 6 mil https://amzn.to/2SJQ6FZ
Margin Trowel https://amzn.to/352MYHx
Mortar Mixer https://amzn.to/2ZxYqtF
4in Sandpaper for Stone Polishing https://amzn.to/2ZB2skT
Polishing Rubber Backing Pad https://amzn.to/2srikdy
Montolit 63P3 24 Inch Tile Cutter https://amzn.to/2MDoFtl
DEWALT Wet Tile Saw https://amzn.to/2QqpO8O
Rubi Thinset mixer https://amzn.to/39VmNWV
Opt into NTCA’s VIP Text Messaging program for training opportunities.
Text “NTCA” to 31996 or Visit https://widget.smsinfo.io/v2/ae58812ba684c1dc65550d3349dbc2e6
For Industry Professionals only
Видео How to get flat walls for your tile. канала Sal DiBlasi
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
![Get Walls FLAT for TILE INSTALLATION --- Furring Strips, Sister Studs, and Cardboard Shims](https://i.ytimg.com/vi/IDyXMS8zDzo/default.jpg)
![How to Install Cement board, all the steps needed form cutting and installing to waterproofing.](https://i.ytimg.com/vi/rsubb1HuLks/default.jpg)
![Self leveling a floor, how it's done.](https://i.ytimg.com/vi/eDg6pjD001o/default.jpg)
![How to Straighten a Wall For Plasterboard](https://i.ytimg.com/vi/92PEtTtpUsw/default.jpg)
![How to fix a bad wall. leveling a wall. making a wall plumb. Bathroom Renovation. DIY](https://i.ytimg.com/vi/_XQQSstjNAQ/default.jpg)
![BACKERBOARD/DRYWALL Transition Tile Shower Wall](https://i.ytimg.com/vi/TtVwkBVtdi4/default.jpg)
![Wall Frames - How To Get Straight For Plaster Sheeting](https://i.ytimg.com/vi/FuCE8xaxg2s/default.jpg)
![Fur, Shim, Get your walls flat before you install your backer board](https://i.ytimg.com/vi/VIVLnhgJafY/default.jpg)
![Complete tile Shower install Part 1 furring out studs installing backer board](https://i.ytimg.com/vi/PCUWkbG060s/default.jpg)
![BAD SHOWER DAY ONE !!](https://i.ytimg.com/vi/zoy-dnyqibM/default.jpg)
![REDGARD vs SCHLUTER](https://i.ytimg.com/vi/e__ntwvRX5U/default.jpg)
![First day. Tile Master Bathroom Build Part 1](https://i.ytimg.com/vi/4PnT5UCe7qc/default.jpg)
![Step by Step How to Build a Walk-In Shower Wedi system](https://i.ytimg.com/vi/G0ViFmacb0M/default.jpg)
![Thinset for Tile...DO's and DON'Ts with Jeff Paterson of Home Repair Tutor](https://i.ytimg.com/vi/7gOPnmhiv04/default.jpg)
![Common mistakes when installing a tile floor](https://i.ytimg.com/vi/gfXj873_SIM/default.jpg)
![Flat walls for tile the easy way👍](https://i.ytimg.com/vi/5MAlU9z0LNY/default.jpg)
![How To Create Perfect Shower Corner Walls For Tiling | Wet Shimming](https://i.ytimg.com/vi/OMUW1E3FAwg/default.jpg)
![🤔 Glass tile what you need to know before you install it.](https://i.ytimg.com/vi/Q-MCdbgjSYs/default.jpg)
![How to make a custom niche out of foam board for your shower](https://i.ytimg.com/vi/mOUW3LA_O-U/default.jpg)
![Tile Shower Failure and repair. Part 1 through 5](https://i.ytimg.com/vi/yESI_cZHXXM/default.jpg)