Afterburner Monday
On a dreary Monday, when it's snowing, what could be better than some raging reheat?
Plus bonus comment.
A few people have mentioned that the flame holder looks like it gets in the way of gas flow.
Remember the gas velocity is not so great there. In the jet pipe, there is some pressure and some speed. As the gas exits the pipe, the accelerating nozzle converts the pressure to a huge increase in speed, and that acceleration of the exhaust is how thrust is made.
Since it is located well upstream of the accelerating nozzle, the losses caused by the flame holder are minimal.
Editor's update: I have tried the Feather brand blades, and they are a big improvement.
They are more confidence inspiring, because they seem to work so much better.
Thanks for the recommendations!
Видео Afterburner Monday канала AgentJayZ
Plus bonus comment.
A few people have mentioned that the flame holder looks like it gets in the way of gas flow.
Remember the gas velocity is not so great there. In the jet pipe, there is some pressure and some speed. As the gas exits the pipe, the accelerating nozzle converts the pressure to a huge increase in speed, and that acceleration of the exhaust is how thrust is made.
Since it is located well upstream of the accelerating nozzle, the losses caused by the flame holder are minimal.
Editor's update: I have tried the Feather brand blades, and they are a big improvement.
They are more confidence inspiring, because they seem to work so much better.
Thanks for the recommendations!
Видео Afterburner Monday канала AgentJayZ
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
![Racing for the title at Mission Raceway](https://i.ytimg.com/vi/zKUO2rvc2hQ/default.jpg)
![Installing our Spey](https://i.ytimg.com/vi/WgNLCXEHJ-c/default.jpg)
![LM1500 test: control room](https://i.ytimg.com/vi/FgZCxQNOKQk/default.jpg)
![Ready to Run](https://i.ytimg.com/vi/fLK-PC-bmtM/default.jpg)
![Hot Section Rebuild](https://i.ytimg.com/vi/PTR5vdHedJU/default.jpg)
![J47 Compressor Reassembly](https://i.ytimg.com/vi/3Qe6FxoXT5w/default.jpg)
![Jet Questions 93](https://i.ytimg.com/vi/sID3SFNRzF0/default.jpg)
![Compressor Inspection - J47 Turbojet](https://i.ytimg.com/vi/ZoyuwFcOOFQ/default.jpg)
![Orenda 14 : Jetfighter Engine](https://i.ytimg.com/vi/7UsUfZqnvO8/default.jpg)
![Jet Questions 62](https://i.ytimg.com/vi/oJOew82wH44/default.jpg)
![Your Questions 16](https://i.ytimg.com/vi/z5smV7fof00/default.jpg)
![Carbon Composite Turbojet Parts 2](https://i.ytimg.com/vi/pRX0MkEa720/default.jpg)
![Jet Questions 59](https://i.ytimg.com/vi/KYLSUdnpNr8/default.jpg)
![Olympus Turbojet in the test cell](https://i.ytimg.com/vi/Ij1p1OGDqa0/default.jpg)
![Your Questions 38](https://i.ytimg.com/vi/NaN3igqnvtk/default.jpg)
![Afterburning Turbojet Run in Ice and Snow](https://i.ytimg.com/vi/McGMVQ7LRk8/default.jpg)
![Jet Questions 96: Books!](https://i.ytimg.com/vi/Hp3StrY-_B8/default.jpg)
![Working on a Turbojet: 9 - A wee bit of AB, plus some IR](https://i.ytimg.com/vi/U6oY1fjbwo0/default.jpg)
![Hangar Tour pt.1](https://i.ytimg.com/vi/VzFv8-ASgZg/default.jpg)
![My Oshkosh 2022](https://i.ytimg.com/vi/jGI1TtNSCT8/default.jpg)
![Working on a Turbojet: 6 - Combustors](https://i.ytimg.com/vi/81-lMGsgwFU/default.jpg)