First look at the Leigh Through Dovetail Jig (Model TD330)
I was super excited to get my hands on one of these Through Dovetail Jigs from Leigh. I've been super happy with my box joint/beehive jig and was waiting for this. Leigh did not disappoint. It's just as simple and easy to use as the B975 Box Joint Jig and it comes in at just as nice of a price point.
This is a great entry level dovetail jig. It comes with everything you need to get up and running except for a (super simple to put together) shop made beam. You can even use a common 2x4 in a pinch. With Leigh's patented e10 Elliptical guide bushing it's easy to dial in the perfect fit for your joint.
The Leigh Model TD330 Through Dovetail Jig is easy to use and affordable. Two carbide-tipped dovetail and straight router bits make joints in board widths up to 12-7/8" and board thicknesses up to 13/16" right out of the box. The adjustable side stop positions the tail and pin boards for perfect board edge alignment.
Includes: glass-reinforced nylon Template, e10 Elliptical Guide Bushing, Pin Wrench, 1/2" 8° Dovetail Bit 1/2" Straight Bit, two Side Stops and fully illustrated User Guide.
Check these out at your local Woodcraft store or online at the link below.
https://www.woodcraft.com/products/td330-through-dovetail-jig-leigh
Видео First look at the Leigh Through Dovetail Jig (Model TD330) канала Woodcraft
This is a great entry level dovetail jig. It comes with everything you need to get up and running except for a (super simple to put together) shop made beam. You can even use a common 2x4 in a pinch. With Leigh's patented e10 Elliptical guide bushing it's easy to dial in the perfect fit for your joint.
The Leigh Model TD330 Through Dovetail Jig is easy to use and affordable. Two carbide-tipped dovetail and straight router bits make joints in board widths up to 12-7/8" and board thicknesses up to 13/16" right out of the box. The adjustable side stop positions the tail and pin boards for perfect board edge alignment.
Includes: glass-reinforced nylon Template, e10 Elliptical Guide Bushing, Pin Wrench, 1/2" 8° Dovetail Bit 1/2" Straight Bit, two Side Stops and fully illustrated User Guide.
Check these out at your local Woodcraft store or online at the link below.
https://www.woodcraft.com/products/td330-through-dovetail-jig-leigh
Видео First look at the Leigh Through Dovetail Jig (Model TD330) канала Woodcraft
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Peachtree Dovetail Jig Instructional Video (Full Version)How to Cut Dovetails by Hand – A New Approach (2020)Top 5 Best Dovetail Jigs Review in 2021Easy Box Joint Jig | How To Make Box JointsLeigh Jig DemoImprove your Porter Cable DoveTail Jig for consistent results.Leigh Through Dovetail Jig TD330The Woodpecker Ep 221 - Leigh jigLeigh RTJ400 Router Table Dovetail Jig - Half-Blind DovetailsDovetail jig Porter Cable 4216 setup and reviewEasy Dovetails Using The Cheapest JigHow to make these Alternative Dovetail Joints (The Knapp Joint)How to make the perfect box joint jig {finger joint jig } ~ beginner woodworking DIYMake a Dovetail Box in 12 Minutes -- WOOD magazineHow to Make a Box Joint Jig. Quick Simple and No Dado Needed.MLCS Woodworking Dovetail Jig Set Up and UseThrough Dovetail Joint Jig / How to Make DovetailsHow to Use the LEIGH D4R Pro Dovetail JigDovetail Drawers with Leigh Jig - Part 1Dovetails with the Keller Jig