CPMC X6 TPMS Pairing Guide | Not Recognizing Your Sensor? Try This

Step-by-step pairing instructions:

1. On the CPMC X6 screen, select the tire position you want to pair → click "Binding" → confirm.

2. Quickly screw the sensor tightly onto the valve stem.

3. If the screen shows no response, don’t worry — simply loosen the sensor slightly, then tighten it again.

4. Repeat this loosen → tighten cycle a few times. The sensor should successfully connect.

Why do you need to try this several times?

Our TPMS sensors include a special power-saving design (a "wake-up membrane") to prevent them from transmitting continuously, which would drain the battery much faster.
The sensor requires multiple wake-up attempts before it fully activates into pairing mode.

This is not a defect. Your sensor is working properly — it just needs a little extra attention to wake up.

#CPMCX6 #tpms #carplaymotorcycle

Видео CPMC X6 TPMS Pairing Guide | Not Recognizing Your Sensor? Try This канала CarPlay Motorcycle