How To Make a 2 Piece Silicone Rubber Mold | Mold Making Tutorial
This mold making tutorial video shows how to make a two piece silicone block mold using Mold Star 15. The finished mold can be used for casting resin, wax, foam, and many other materials.
The original model is a plastic sphere. The 2-part mold should be split along the horizontal axis.
Learn other mold making techniques:
* Brush-on mold - http://www.youtube.com/watch?v=ZCIO_2J1gF0
* 1-piece block mold - http://www.youtube.com/watch?v=UhkrEm5XtRU
* Cavity pour mold - http://www.youtube.com/watch?v=-3IBuyfFGw0
* 2-piece core mold - http://www.youtube.com/watch?v=zLC71-04R2o
Mold Star® silicones cure to soft, strong rubbers which are tear resistant and exhibit very low long term shrinkage. Molds made with Mold Star® will last a long time in your mold library and are good for casting wax, gypsum, resins, concrete and other materials. Cured Mold Star® rubber is heat resistant up to 450°F (232°C) and is suitable for casting low-temperature melt metal alloys. Note: Mold Star® rubbers are not intended for brush-on moldmaking.
Make It Now! with Smooth-On
http://www.smooth-on.com/
http://www.facebook.com/SmoothOn
http://twitter.com/SmoothOn
http://www.google.com/+smoothon
-~-~~-~~~-~~-~-
Adult Supervision Required
Keep Out Of Reach Of Children
-~-~~-~~~-~~-~-
Видео How To Make a 2 Piece Silicone Rubber Mold | Mold Making Tutorial канала Smooth-On
The original model is a plastic sphere. The 2-part mold should be split along the horizontal axis.
Learn other mold making techniques:
* Brush-on mold - http://www.youtube.com/watch?v=ZCIO_2J1gF0
* 1-piece block mold - http://www.youtube.com/watch?v=UhkrEm5XtRU
* Cavity pour mold - http://www.youtube.com/watch?v=-3IBuyfFGw0
* 2-piece core mold - http://www.youtube.com/watch?v=zLC71-04R2o
Mold Star® silicones cure to soft, strong rubbers which are tear resistant and exhibit very low long term shrinkage. Molds made with Mold Star® will last a long time in your mold library and are good for casting wax, gypsum, resins, concrete and other materials. Cured Mold Star® rubber is heat resistant up to 450°F (232°C) and is suitable for casting low-temperature melt metal alloys. Note: Mold Star® rubbers are not intended for brush-on moldmaking.
Make It Now! with Smooth-On
http://www.smooth-on.com/
http://www.facebook.com/SmoothOn
http://twitter.com/SmoothOn
http://www.google.com/+smoothon
-~-~~-~~~-~~-~-
Adult Supervision Required
Keep Out Of Reach Of Children
-~-~~-~~~-~~-~-
Видео How To Make a 2 Piece Silicone Rubber Mold | Mold Making Tutorial канала Smooth-On
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Mold Making & Casting Tutorial: 73-20 Figurine MoldSilicone Mold Making: When To Use A Two-Piece Mold. Part 1How To Make a 2 Piece Silicone Mold of a Knife | Mold Making TutorialHow To Make Resin Copies of 3D-Printed FiguresDont throw away your old LED lamp || 3D Wall Panel Mold MakingHow to Create a Replacement Tail Light - Moldmaking and Clear Casting Resin DemonstrationHow to make Two part Silicone molds! - Making my Allosaurus modelsMoulage en 2 parties d'un bol - 2 Part Molding Of A BowlMoldmaking Tutorial: 2 Piece Scale Model Car MoldHow To Cast Resin Using Smooth-Cast® 325 Clear ColorMatch Urethane ResinHow to Mold and Cast a SculptureTwo Piece Silicone Box MoldHow to Mold and Cast a Lightsaber!Make Your Own Silicone Molds - Easy Mold Making (Mould) - For Candle Or Resin MoldsHow to Make a Complex 3 Part Silicone MoldHow to Make a Two Part Silicone Mold - Destiny Hand Cannon CastingMake A Silicone Mold For A DIY Cement Planter From An Existing ObjectHow to Make Silicone Molds (A MUCH better updated version)Silicone Mold Making: One Piece Silicone Block MoldSilicone Mold & Resin Casting : Roman Relief