Review of etrailer Trailer Jack - Dual-Pin Two-Speed Square Tube Jack - e45YV

Click for more info and reviews of this etrailer Trailer Jack:
https://www.etrailer.com/Trailer-Jack/etrailer/e45YV.html
Check out some similar Trailer Jack options:
https://www.etrailer.com/dept-pg-Trailer_Jack-sf-Car_Hauler.aspx

https://www.etrailer.com
Don’t forget to subscribe!
https://www.youtube.com/user/etrailertv

Full transcript: https://www.etrailer.com/tv-Demo-etrailer-Trailer-Jack-Dual-Pin-Two-Speed-Square-Tube-Jack-e45YV.aspx
Hi, everyone, Steven here with etrailer. Today we're looking at etrailer's dual pin two speed square tube jack. Now folks, this is rated at 20,000 pounds of static capacity and a 12,000 pound lift capacity. Now this has two speed gearbox, meaning it's gonna raise or lower those heavy loads faster and easier. And the dual pin spring return drop leg here will let you quickly set the height without even having to crank. So let's take a look at that first.

So obviously if this was attached to your trailer, it's a well on by the way. You'd use your foot, you could push this down, and then you'd be able to push the foot plate and the inner tube down to touch the ground. And then you would finish lifting with cranking and everything. And then to return it, same thing. Once you take the pressure off, it's gonna slide right back up in place.

Or you can use this if you need to unlock or lock it, you know, to be able to do that. And then of course you have the handle clip here that you could weld onto the side of the jack or whatnot. And then that handle would stay in place wherever you decide to mount that on the jack, whatever best suits your needs for your application. Now again, this is a 20,000 pound static capacity and 12,000 pound lift. The footplate is a nine inch by nine inch square, and it also has a hole drilled into it for drainage.

So obviously this is kind of curved up to help give more stability on the surface that you're putting it in contact with. That's gonna help water drain out. You don't have to worry about rust, corrosion and those kind of things. The travel overall is 26 1/2 inches. The screw travel inside of the jack is 13 1/2 inches.

Now obviously you can see it's got a great powder coat finish on it. You also up here at the top have I believe, three different grease zerks, no, two of 'em, sorry, two grease zerks here. And that's gonna be for pumping grease inside the gearbox. Keeping up with your maintenance is very important. You wanna prolong the life of your jack and the lift system. And as you can see, again, you've got a bar here and here. And if you've never used these before, it's pretty simple. Obviously once you get this installed, I just have it loosely fitting here. You could then crank the jack up or down. And then you can also either pull this out more to change the speed or push it in to change the speed, depending on if you want fast or slow. And then of course, you just pull this handle back up and now it can pivot out of the way for storage when not in use. And again, I just kind of have that loosely dangling there. So bear with me. So again, folks, a great jack, a very heavy duty jack. This is our etrailer dual pin two speed square tube jack. I'm Steven, reach out if you have any questions about this or any other product and have a great day.

Видео Review of etrailer Trailer Jack - Dual-Pin Two-Speed Square Tube Jack - e45YV канала etrailer