IGBT Testing Part 2 - (DMM) Multimeter Test
Part 2 of testing IGBT Brick Modules, testing with a (DMM) Digital Multimeter. See end of video for diagrams & write-ups. https://www.amazon.com/shop/kevingittemeier
How to Solve a Rubik’s Cube Tutorial: https://youtu.be/9spDGBeWl1o
Click to SUBSCRIBE: http://goo.gl/Vsl5UE
Part 1 is testing IGBTs with a lamp & battery.
Check out our amazon storefront where most of the tools, material and products in our videos can be found https://www.amazon.com/shop/kevingittemeier
Like, Subscribe & Check out other videos:
Videos: http://goo.gl/q1AopP
Magnets / Magnetism: http://goo.gl/4Q89Y2
Electric Projects & Demos: http://goo.gl/SpzJ5j
Amazing illusions: http://goo.gl/HIR3m4
What is This?: http://goo.gl/yTWCSI
----
IGBT Battery Lamp Test:
- Wire lamp in series with battery and IGBT polarity respective.
Negative of battery to E, Positive of battery to lamp
, other side of lamp to C.
- Touch positive of battery and gate to turn on.
- Touch negative of battery and gate to turn off.
* Note touch battery first as IBGTs are ESD sensitive and can be damaged.
IGBT DMM Test Procedure:
Collector-Emitter Junction test:
- With the module out of circuit remove the conductive foam and short the gate to emitter.
- With DMM in diode check mode, the collector to emitter should give a normal diode reading with positive on the emitter and negative on the collector.
- The DMM should read open or infinite with positive on the collector and negative on the emitter. Damaged IGBTs may test as shorted in both positive and negative directions, open in both directions, or resistive in both directions.
Gate test: With the DMM in resistance mode the resistance from gate to collector and gate to emitter should read infinite on a good device. A damaged device may be shorted or have resistive leakage from gate to collector and/or emitter.
Never apply a voltage greater than 20V to the collector-emitter with the gate terminal open.
- Always use static (ESD) safe handling procedures and replace the conductive gate-emitter foam after testing.
----
The following are several brands of IGBT:
Fairchild IGBT,
Infineon IGBT,
Powerx IGBT,
PWRX IGBT,
IXYS IGBT,
Semikron IGBT,
Vishay IGBT,
Mitsubishi IGBT,
Fuji IGBT,
Toshiba IGBT,
Hitachi IGBT,
Видео IGBT Testing Part 2 - (DMM) Multimeter Test канала Edu.Science
How to Solve a Rubik’s Cube Tutorial: https://youtu.be/9spDGBeWl1o
Click to SUBSCRIBE: http://goo.gl/Vsl5UE
Part 1 is testing IGBTs with a lamp & battery.
Check out our amazon storefront where most of the tools, material and products in our videos can be found https://www.amazon.com/shop/kevingittemeier
Like, Subscribe & Check out other videos:
Videos: http://goo.gl/q1AopP
Magnets / Magnetism: http://goo.gl/4Q89Y2
Electric Projects & Demos: http://goo.gl/SpzJ5j
Amazing illusions: http://goo.gl/HIR3m4
What is This?: http://goo.gl/yTWCSI
----
IGBT Battery Lamp Test:
- Wire lamp in series with battery and IGBT polarity respective.
Negative of battery to E, Positive of battery to lamp
, other side of lamp to C.
- Touch positive of battery and gate to turn on.
- Touch negative of battery and gate to turn off.
* Note touch battery first as IBGTs are ESD sensitive and can be damaged.
IGBT DMM Test Procedure:
Collector-Emitter Junction test:
- With the module out of circuit remove the conductive foam and short the gate to emitter.
- With DMM in diode check mode, the collector to emitter should give a normal diode reading with positive on the emitter and negative on the collector.
- The DMM should read open or infinite with positive on the collector and negative on the emitter. Damaged IGBTs may test as shorted in both positive and negative directions, open in both directions, or resistive in both directions.
Gate test: With the DMM in resistance mode the resistance from gate to collector and gate to emitter should read infinite on a good device. A damaged device may be shorted or have resistive leakage from gate to collector and/or emitter.
Never apply a voltage greater than 20V to the collector-emitter with the gate terminal open.
- Always use static (ESD) safe handling procedures and replace the conductive gate-emitter foam after testing.
----
The following are several brands of IGBT:
Fairchild IGBT,
Infineon IGBT,
Powerx IGBT,
PWRX IGBT,
IXYS IGBT,
Semikron IGBT,
Vishay IGBT,
Mitsubishi IGBT,
Fuji IGBT,
Toshiba IGBT,
Hitachi IGBT,
Видео IGBT Testing Part 2 - (DMM) Multimeter Test канала Edu.Science
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
![How To Test an IGBT](https://i.ytimg.com/vi/z3Mdc5qQx8k/default.jpg)
![Calculer l'autonomie d'une batterie](https://i.ytimg.com/vi/rMQb02KCvLM/default.jpg)
![IGBT Testing Part 1 - Lamp & Battery Test](https://i.ytimg.com/vi/mq7wazfUmwM/default.jpg)
![[436] How To Test IGBT / How to Check IGBT with Mulimeter / Why IGBT Damage](https://i.ytimg.com/vi/BDN8ayhhECo/default.jpg)
![How to Test IGBT Bricks - DMM Test & Lamp Test](https://i.ytimg.com/vi/Y8WiZcYLJ0g/default.jpg)
![Testing the IGBT Power Module for Short Circuits](https://i.ytimg.com/vi/6CSKv_aW8oY/default.jpg)
![Capacitors Explained - The basics how capacitors work working principle](https://i.ytimg.com/vi/X4EUwTwZ110/default.jpg)
![IGBT Testing dengan Multimeter](https://i.ytimg.com/vi/cIXbyPlqqqo/default.jpg)
![How to test an IGBT with a Multimeter](https://i.ytimg.com/vi/hPgf20ziQR0/default.jpg)
![How To Test All Electronic Components with Multimeter | Resistor Capacitor Diode LED Transistor Fuse](https://i.ytimg.com/vi/Z_9GldZp9dE/default.jpg)
![IGBT testing procedure in Microtek Hi end UPS Jumbo SW Series](https://i.ytimg.com/vi/lcSWSz6X3rI/default.jpg)
![How to test a Transformer using digital multimeter](https://i.ytimg.com/vi/D0OQvuux6CE/default.jpg)
![How to test a capacitor / how to test smd capacitors with a multimeter](https://i.ytimg.com/vi/uBUEjeS5UmI/default.jpg)
![How to Test IPM IGBT Diode & Gate Junction with DMM - 6 Pack Powerex PM150CVA120](https://i.ytimg.com/vi/HavOANC4lbQ/default.jpg)
![90. IGBT Theory and Testing](https://i.ytimg.com/vi/SjVmICAJqSg/default.jpg)
![How to test an IGBT brick.](https://i.ytimg.com/vi/AbeTKHzm6_g/default.jpg)
![PeePaw McDonald's Inventions IGBT/Transistor Power Module Tester](https://i.ytimg.com/vi/H4plP7pbz_M/default.jpg)
![IGBT TESTING | sponsored by Yatin Industronics](https://i.ytimg.com/vi/-4xzcZC8-_0/default.jpg)
![SEMIKRON Thyristors test with multimeter | SEMIKRON SKKH42/16E Testing in urdu And hindi](https://i.ytimg.com/vi/1LnS-w1Dqcc/default.jpg)
![Test and analysis of unusual (dead) LED lamp.](https://i.ytimg.com/vi/W0a8qaO2kn4/default.jpg)