Загрузка страницы

How to Make Water Pump Free Energy (Large Size) - Ram pump with 478 m out pipe

How to Make Water Pump Free Energy - Large Size (Ram Pump) using a 3 inch PVC pipe with two valves.
height: 72 m from ground level
input pipe length: 120 meters using a 3-inch pipe
Input pipe elevation: 2.6 meters
Out pipe length: 478 meters
NOTE: This pump uses hydropower as an energy source, to lift the amount of water as much as possible to a higher level, the source of incoming water flows along 120 m. with the power of the water can raise water as far as 478 m, with a height of 72 meters. It takes two exhaust valves to be able to produce energy so that it can supply the water that is needed.
This pump is named "IETEUGA" (strong water) is designed to be able to overcome water requirements above altitude.

how to install it is in content: https://youtu.be/-nvyJADKdQ0
@Tradisional Channel​ https://www.youtube.com/c/TradisionalChannel_Indonesia

Видео How to Make Water Pump Free Energy (Large Size) - Ram pump with 478 m out pipe канала Tradisional Channel
Показать
Комментарии отсутствуют
Введите заголовок:

Введите адрес ссылки:

Введите адрес видео с YouTube:

Зарегистрируйтесь или войдите с
Информация о видео
28 декабря 2018 г. 15:38:35
00:10:13
Яндекс.Метрика