Sawmill Log stops
As always when opperating a sawmill the goal is to produce quality lumber, and get the job done as fast and effeciently as possible. I'm always looking to improve on ways and techniques in this process. I for some time have studdied as to weather i wanted to pull another Hydraulic circuit from the power beyound port on the spool valve that opperates the claw turner to raise and lower the stops, via a Hydraulic motor, or a cylinder hooked to the chains,, then I thought why cant I just rout the #40 chain and build a frame, install bearings and a crank handle,, I had bearings, some #40 chain,, so for a cost of about $40,, I had the 2 stops working,, I now have the 3rd stop working for another $30
Видео Sawmill Log stops канала ROBERT ROSS
Видео Sawmill Log stops канала ROBERT ROSS
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Log Stop Modification and Cutting a Cherry on the Frontier OS27 SawmillHomemade Sawmill Log ClampsHow To Build A Sawmill - Part 1 - Quick Release Log DogsMaximum Cut Width On My Homemade Sawmill - Band Sawmill Build #28dicing up a log2Why Tulip Poplar is My FAVORITE Wood to MillAmazing Modern Wood Sawmill Machines, Extreme Automatic Wood Cutting Machinelog clamps ..success & failuresWoodland Mills Log TurnerLog Holding - Building a Large Bandsaw Mill - Part 14A Day at the MillMilling a HUGE Sweet Gum log! Beautiful!Sawmill clamp system ideasFrom Logs to Lumber | Frontier Sawmill | Blade ChangeHYDRAULIC CLAW TURNERBandsaw-on-a-dolly sawmill#123 Frick Machinal Duplex Log Turner Part 1Sawmill Mods023 - Assembling a Woodland Mills HM126 Portable Saw MillLap siding jig for the Wood-Mizer LT35