FJ Cruiser Smittybilt M1 off road bumper install

In this video I'm going step-by-step following the instructions to see if there are any inaccuracies. There are a few mistakes in the steps but for the most part they can be followed. The tools you'll need are a 10mm socket, 14mm socket (preferably 1/2 in drive) along with a breaker bar, a flathead screwdriver and a phillips head screwdriver.

Color instructions: http://www.smittybiltdepot.com/aux_incl/pdf.ashx?pdf=SB612850.pdf&line=S/B

Other videos:

LED Light pods
https://youtu.be/et6Z945XbXw

Switch and relay wiring
wiring: https://youtu.be/vshg__0dlig
switches: https://youtu.be/Yfziz_hkTh8

Reverse off-road lights
https://youtu.be/arzn5KkOABU

off-road bumper lights installation
https://youtu.be/2uPR6477PRo

ATRAC button
https://youtu.be/HbG66WEfhGU

MULE Expedition Outfitters High angle CV boots
https://youtu.be/eaa_pj1XCds

Wheel Bearings
https://youtu.be/TyBkpTbQZYU

Rear lift install
https://youtu.be/7cmMqT6pI0o

Sway Bar Drop
https://youtu.be/5aWtp6_FofA

Differential Drop
https://youtu.be/Ssc3SRS0RUI

Body Mount Chop
https://youtu.be/XVuXTlHMprU

All aluminum radiator
(coming soon)

130 Amp Tacoma alternator
https://youtu.be/fGcgCsmxEIM

Fender Flares
installation: https://youtu.be/ynxDcRKFUwc
paint inspection after 2 years: https://youtu.be/5wUUedif4dQ

Upper Control Arm installation
https://youtu.be/7cmMqT6pI0o

Видео FJ Cruiser Smittybilt M1 off road bumper install канала HourNine Racecraft