Saxophone Repair Topic: Patching a Neck Pickup Hole
Saxophone repairman Matt Stohrer of http://www.StohrerMusic.com shows one way to cleanly patch a hole left from a neck pickup. Neck pickups were semi-commonly installed- by drilling a hole in the neck- in the 1970s and 1980s. Nowadays mics do the job pretty well, and most folks with a neck pickup installed would like to remove them since they can be prone to leakage, devalue the horn compared to a decently done patch, and (to some, including myself) look quite unsightly.
This is how I do it, and might not be the best way, but hopefully can provide you with more information on the subject than you had prior to watching.
If you like this stuff, consider supporting me on Patreon: https://www.patreon.com/mattstohrer
Also check out the Open Source Saxophone Project: http://www.OpenSourceSaxophoneProject.com
Видео Saxophone Repair Topic: Patching a Neck Pickup Hole канала Stohrer Music
This is how I do it, and might not be the best way, but hopefully can provide you with more information on the subject than you had prior to watching.
If you like this stuff, consider supporting me on Patreon: https://www.patreon.com/mattstohrer
Also check out the Open Source Saxophone Project: http://www.OpenSourceSaxophoneProject.com
Видео Saxophone Repair Topic: Patching a Neck Pickup Hole канала Stohrer Music
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Advanced Saxophone Repair Topic: Pivot Receiver Bushing and Post WasherSaxophone Repair Topic: Dent Removal Example 4 (Coyote Edition)Saxophone Repair Topic: Make Key Risers (The Dumb Way?)Ultimate Saxophone OverhaulHARD Soldering Basics for saxophonesReplacing a Saxopone Crook CorkStohrer Music News: Don't Freak Out But I'm Sort Of Taking A Break (Edit: I'm back now)Total neck restauration - Holton baritone saxophoneSaxophone Repair Topic: Repairing Some Typical Long Term Damage on an old Selmer Tenor, Part 5How To Silver Solder a Broken BraceSaxophone Repair Tip: Inherent Key AdjustmentsSaxophone Repair Topic: Making Shellac SticksSaxophone Repair Shop (in an Airstream) Tour: The Teensy-weensy LatheBrass Sax Mouthpiece Repair by Brazing with Silver SolderFerree's Z-60 Demo Small Bell dent removalSaxophone Repair Topic: Sizing Sax Pads (And Why I Don't Use Pad Sets)Mounting instructions for Nalbantov NCM Pickup Systems for SaxophoneSaxophone Repair Topic: Assembly of the Conn Saxophone MicrotunerSaxophone Repair Topic: Key fit and the G#/bis regulation