Загрузка страницы

Just About Sailing October 2020 - Installing the Windlass - Pt 2 Anchor Locker Drain

This is the second part of installing a new Lofrans electric windlass. There is a link to the first video below. This video is solely about putting in the new 'floor' in the anchor locker and sorting out the drain. Somewhat over-engineered I know. But hopefully good practice for what I plan to be doing with the holding tank.
Here is the link to Part 1
https://www.youtube.com/watch?v=H41T_S7biNU&t=133s

Видео Just About Sailing October 2020 - Installing the Windlass - Pt 2 Anchor Locker Drain канала Very Nearly About Sailing
Показать
Комментарии отсутствуют
Введите заголовок:

Введите адрес ссылки:

Введите адрес видео с YouTube:

Зарегистрируйтесь или войдите с
Информация о видео
28 октября 2020 г. 16:58:40
00:21:08
Другие видео канала
Just About Sailing April 2020 - Making a DIY plastic water tank, Pt2 Construction & first Leak TestJust About Sailing April 2020 - Making a DIY plastic water tank, Pt2 Construction & first Leak TestVery Nearly About Sailing October 2022 - Actually Fitting the Rudder and taking bits off the CarVery Nearly About Sailing October 2022 - Actually Fitting the Rudder and taking bits off the Car#10 After the rescue Part 2 - feeling foolish and embarassed#10 After the rescue Part 2 - feeling foolish and embarassedJust About Sailing December 2020 - New windlass install, Pt 3 - Deck modification and strengtheningJust About Sailing December 2020 - New windlass install, Pt 3 - Deck modification and strengtheningVNAS December 2023 - Annual Musical Extravaganza and ReviewVNAS December 2023 - Annual Musical Extravaganza and ReviewJust About Sailing December 2 2020 - Installing the Windlass - Pt 4 Wiring it up and trying it outJust About Sailing December 2 2020 - Installing the Windlass - Pt 4 Wiring it up and trying it outVery Nearly About Sailing August 2022 - measuring the spare sail and sanding the keel joinVery Nearly About Sailing August 2022 - measuring the spare sail and sanding the keel joinVNAS May 2024 - Router Table Insert, Double Bass Stand, Honda Civic and a tiny bit of boat workVNAS May 2024 - Router Table Insert, Double Bass Stand, Honda Civic and a tiny bit of boat work#6 Reflections on maiden 'voyage' - first engine issues#6 Reflections on maiden 'voyage' - first engine issues#5  Launch day - final thoughts prior to first short 'voyage'#5 Launch day - final thoughts prior to first short 'voyage'Just About Sailing September 2 2017 - Holding tank plans and off with the rudder, almostJust About Sailing September 2 2017 - Holding tank plans and off with the rudder, almostJust About Sailing December 2 2017 - Christmas Special, Musical ExtravaganzaJust About Sailing December 2 2017 - Christmas Special, Musical ExtravaganzaJust About Sailing October 2 2018 - Hatch Removal, Refurbishment and RefittingJust About Sailing October 2 2018 - Hatch Removal, Refurbishment and RefittingJust About Sailing September 2016 - crawlng around the engine and having a whale of a timeJust About Sailing September 2016 - crawlng around the engine and having a whale of a timeJust About Sailing - The £200 Millionaire - don't get rich quickJust About Sailing - The £200 Millionaire - don't get rich quickJust About Sailing May 5 2017 - The Journey pt 11, Brighton Dock, then off to EastbourneJust About Sailing May 5 2017 - The Journey pt 11, Brighton Dock, then off to EastbourneJust About Sailing May 2016 - Proper sailing with actual wind where nothing breaksJust About Sailing May 2016 - Proper sailing with actual wind where nothing breaksVNAS April 2024 - Small Workshop Tour, table saw jigs, making a pedal board and a small cabinetVNAS April 2024 - Small Workshop Tour, table saw jigs, making a pedal board and a small cabinet#2 Prioritising - first cup of tea on sailboat as liveaboard#2 Prioritising - first cup of tea on sailboat as liveaboardVery Nearly About Sailing July 2022 - Refitting the rudder. Well, very nearlyVery Nearly About Sailing July 2022 - Refitting the rudder. Well, very nearlyVNAS August 2023 - Sharpening up on my woodworking skills - Making a Workshop StoolVNAS August 2023 - Sharpening up on my woodworking skills - Making a Workshop Stool
Яндекс.Метрика