Restoration of an Old Hunting Knife! The most Beautiful Handle
Today I have an old hunting knife for restoration.
This is a knife of one of four in the lot that I purchased!
There is one oddity, none of these knives have a handle, although there are pins for mounting!
Restoration process.
I used electrolysis for rust removal, I used a steel plate as an anode, and the knife itself was the cathode!
For the handle I chose a block of stabilized wood (our craftsmen make them of amazing beauty!!!). In this state, the wood is much harder and denser than a regular bar, thus my new handle will be ETERNAL)))!
I also used a special spacer for knife handles (G10, 1 mm).
I assembled everything with epoxy glue, during assembly I lost my nail on the finger of my left hand (do not try to twist something with a screwdriver if this part is in your palm), could not work for two days, and then completed the processing of the handle.
I treated the handle with wood oil, hand polished it with a cotton ribbon, and was amazed by the beauty of the stabilized wood!!!
I really liked the result, I hope you do too.
There are many more cool and interesting videos on the channel, I will be grateful if you watch some of them!
FRIENDS ATTENTION!
I started a new channel on YouTube.
This channel is all about cooking!
Mostly male food! Everything we like - more meat, and without unnecessary troubles!
Please support my endeavor! Follow the link, look at a couple of recipes, I'm sure you'll like it!
Thank you!
https://www.youtube.com/channel/UCjWqeIua4jzuPkXP2WBAAuA
Good luck to you all and take care of yourself!
See you next week!
Best regards Max!
#rusty
#knife
#restoration
Видео Restoration of an Old Hunting Knife! The most Beautiful Handle канала Restoration In The Back Room
This is a knife of one of four in the lot that I purchased!
There is one oddity, none of these knives have a handle, although there are pins for mounting!
Restoration process.
I used electrolysis for rust removal, I used a steel plate as an anode, and the knife itself was the cathode!
For the handle I chose a block of stabilized wood (our craftsmen make them of amazing beauty!!!). In this state, the wood is much harder and denser than a regular bar, thus my new handle will be ETERNAL)))!
I also used a special spacer for knife handles (G10, 1 mm).
I assembled everything with epoxy glue, during assembly I lost my nail on the finger of my left hand (do not try to twist something with a screwdriver if this part is in your palm), could not work for two days, and then completed the processing of the handle.
I treated the handle with wood oil, hand polished it with a cotton ribbon, and was amazed by the beauty of the stabilized wood!!!
I really liked the result, I hope you do too.
There are many more cool and interesting videos on the channel, I will be grateful if you watch some of them!
FRIENDS ATTENTION!
I started a new channel on YouTube.
This channel is all about cooking!
Mostly male food! Everything we like - more meat, and without unnecessary troubles!
Please support my endeavor! Follow the link, look at a couple of recipes, I'm sure you'll like it!
Thank you!
https://www.youtube.com/channel/UCjWqeIua4jzuPkXP2WBAAuA
Good luck to you all and take care of yourself!
See you next week!
Best regards Max!
#rusty
#knife
#restoration
Видео Restoration of an Old Hunting Knife! The most Beautiful Handle канала Restoration In The Back Room
Показать
Комментарии отсутствуют
Информация о видео
2 апреля 2022 г. 23:39:27
00:15:46
Другие видео канала
Cattle Rancher has a Big Problem | Hunting Predators with ThermalKorea's best handmade knife master. Knife making processSatisfying Videos of Workers Doing Their Job Perfectly ▶7WW2 German Mauser K98 Bayonet RestorationFully restoration 1980 AUDI Q8 car abandoned for 30 years | Restoration ChannelFull Restoration Old motorcycles upKAWASAKI| Restored Two-stroke Rebel engine USA #rebel2r FullRestoration Old Geneve watch | Restoring Destroyed waterproof watchRestoration of a Vintage Rolex Oyster Perpetual Date - Ref 1500 Caliber 1570Witch Knife Restoration?! I think I'm a little afraid of it.【里山狩猟生活#19】大物イノシシを獲って、解体し、食べるまでDesert Eagle restoration - 50 a.e. caliber gun restoration1930 TT-30 Tokarev Auto Pistol Restoration女汉子修复大山里的柴油机,还牵了只羊回家 | 林果儿 It took 2 days to fix the diesel engine from goat farmers in the village!Old Model Ruger Revolver Gun Restoration (decoration gun find in river )1851 Navy Model RestorationJapanese Vietnam War Era Jet Pilot's Survival Knife RESTORATION錆びた古い日本軍の銃剣を修理します‼50 CAL VS TRAIN TRACK RAILTurn A 2€ Rusty Knife Into High-End Japanese Chef's KnifeRestoration Very Rusty Survival Knife - With Amazing HandleEXTREMELY Rare Lighter Restoration, World War 2 - D-day 1944!