Jawa 350/639 engine mounting Part 1 (no guide)

This is the 6. video from a series of Jawa 350/639 engine renewal videos. This time we are going to put the dead mass compensating panels into the crank case and we will preassemble the gearbox and look at axial play of the shafts a little. Please note:

THIS IS NOT A GUIDE ON HOW TO DO IT!

Toto je 6. video zo serie o renovacii motora Jawa 350/639. Tento krat vlozime do bloku panely vyplnajuce mrtvy priestor po zmenseni klukovky a zbezne predzlozime prevodovku a mrkneme na axialnu volu hriadelov prevodovky. Prosim berte na vedomie, ze:

TOTO NIE JE NAVOD AKO NA TO.

Next videos:

Engine into the frame and Start
https://youtu.be/hsPSgqwjlmk
Final engine assembly:
https://youtu.be/cd8mbGSeOOg
Videos before:

Removing the crank, comparison btw. serial and sport crank
https://youtu.be/af3CbkHq6Qg

Dismounting pistons and cut the engine in halves with a selfmade tool
https://youtu.be/JyEWsRYEy28

Dismounting primary gear and clutch
https://youtu.be/8wU3yog5mUo

Dismounting some basic parts, cleaning the engine
https://youtu.be/spvD7cllSU0

Engine out of frame
https://youtu.be/TZiywPJehnI

Видео Jawa 350/639 engine mounting Part 1 (no guide) канала REBUILD Lab