Spiker Engineering Scangauge/Ultragauge Mount
*Did our video help you? If so, consider buying us a beer: https://bit.ly/3feE6tJ*
This video showcases how to install another one of Spiker Engineering's cool products. This product was made to mount the Scangauge II in your ’96-02 4Runner (3rd Gen) or ’96-00 Tacoma (1st Gen). It places the Scangauge where you can see it without taking your eyes off the road and without obstructing your view. No need to use suction cups or tape that won’t stand up to daily use or heavy wheeling. It attaches securely to the A-pillar grab handle & was made from a precision laser cut from heavy gauge cold rolled steel, and finished with flat black powder coat.
This product is 100% USA Made and includes industrial strength 3M Dual Lock strips to hold the Scangauge securely.
NEW** A high-strength M6x1.0 socket head screw is included to replace original Phillips grab handle screw.
NOTE** SCANGAUGE IS NOT INCLUDED
**Note: To install this mount, you will need to remove the a-pillar handle Phillips screw. Early Toyota trucks had loctite applied to these screws, and some are more difficult to remove than others. You may be able to remove it with regular tools, or you may need a special JIS bit and impact driver, or (in rare cases) you may need to drill out of the screw. The instructions supplied with these mounts provide some tips on tools and techniques to help remove the screw. We recommend that you try to loosen the screw BEFORE placing your order, to make sure that you can get the screw out. Please contact us for additional tips on screw removal. A replacement high strength screw is included with the mount, in case you damage the original Phillips screw. To see how to use an Impact Driver to get the A-pillar grab handle screws out, click on the link to our Transmission Temperature Gauge Install video and go to play time 5 minutes and 20 seconds.
https://youtu.be/fT_2szdKXRM
**PARTS**
*ScanGauge - SG2 II Ultra Compact 3-in-1 Automotive Computer with Customizable Real-Time Fuel Economy Digital Gauges https://amzn.to/2QTlz6z
*UltraGauge EM Plus Automotive OBD2 Scanner, Code Reader, Gauges & Mileage Calculator - All New v1.4 https://amzn.to/33Qb2yv
*Scangauge Mount* (1st gen tacoma/3rd gen 4Runner)
https://spikerengineering.com/product/scangauge-mount
*Ultragauge Mount* (1st gen tacoma/3rd gen 4Runner)
https://spikerengineering.com/product/ultragauge-mount
**HELPFUL TOOLS**
*If you're looking for other tools not used in this video, check out Timmy's Master Tool List.*
https://www.amazon.com/shop/timmythetoolman?isPublicView=true
*Impact Driver Set - (to remove A-pillar grab handle screws)
https://amzn.to/2HTa4Ko
*Vessel JIS Screwdriver - (nice screwdriver meant for Japanese made screws)
https://amzn.to/2GbIoPf
*Motion Pro JIS Crosshead Hex Drive Bit (No. 2)
https://amzn.to/3dBy6W9
*Makita B-52370 Impact Gold Torsion Bit Set (38 Piece)
https://amzn.to/3aClHzv
**As Ebay Partner Network members, we earn commissions from qualifying purchases.
**As Amazon Associates, we earn from qualifying purchases.
Видео Spiker Engineering Scangauge/Ultragauge Mount канала Timmy The Toolman
This video showcases how to install another one of Spiker Engineering's cool products. This product was made to mount the Scangauge II in your ’96-02 4Runner (3rd Gen) or ’96-00 Tacoma (1st Gen). It places the Scangauge where you can see it without taking your eyes off the road and without obstructing your view. No need to use suction cups or tape that won’t stand up to daily use or heavy wheeling. It attaches securely to the A-pillar grab handle & was made from a precision laser cut from heavy gauge cold rolled steel, and finished with flat black powder coat.
This product is 100% USA Made and includes industrial strength 3M Dual Lock strips to hold the Scangauge securely.
NEW** A high-strength M6x1.0 socket head screw is included to replace original Phillips grab handle screw.
NOTE** SCANGAUGE IS NOT INCLUDED
**Note: To install this mount, you will need to remove the a-pillar handle Phillips screw. Early Toyota trucks had loctite applied to these screws, and some are more difficult to remove than others. You may be able to remove it with regular tools, or you may need a special JIS bit and impact driver, or (in rare cases) you may need to drill out of the screw. The instructions supplied with these mounts provide some tips on tools and techniques to help remove the screw. We recommend that you try to loosen the screw BEFORE placing your order, to make sure that you can get the screw out. Please contact us for additional tips on screw removal. A replacement high strength screw is included with the mount, in case you damage the original Phillips screw. To see how to use an Impact Driver to get the A-pillar grab handle screws out, click on the link to our Transmission Temperature Gauge Install video and go to play time 5 minutes and 20 seconds.
https://youtu.be/fT_2szdKXRM
**PARTS**
*ScanGauge - SG2 II Ultra Compact 3-in-1 Automotive Computer with Customizable Real-Time Fuel Economy Digital Gauges https://amzn.to/2QTlz6z
*UltraGauge EM Plus Automotive OBD2 Scanner, Code Reader, Gauges & Mileage Calculator - All New v1.4 https://amzn.to/33Qb2yv
*Scangauge Mount* (1st gen tacoma/3rd gen 4Runner)
https://spikerengineering.com/product/scangauge-mount
*Ultragauge Mount* (1st gen tacoma/3rd gen 4Runner)
https://spikerengineering.com/product/ultragauge-mount
**HELPFUL TOOLS**
*If you're looking for other tools not used in this video, check out Timmy's Master Tool List.*
https://www.amazon.com/shop/timmythetoolman?isPublicView=true
*Impact Driver Set - (to remove A-pillar grab handle screws)
https://amzn.to/2HTa4Ko
*Vessel JIS Screwdriver - (nice screwdriver meant for Japanese made screws)
https://amzn.to/2GbIoPf
*Motion Pro JIS Crosshead Hex Drive Bit (No. 2)
https://amzn.to/3dBy6W9
*Makita B-52370 Impact Gold Torsion Bit Set (38 Piece)
https://amzn.to/3aClHzv
**As Ebay Partner Network members, we earn commissions from qualifying purchases.
**As Amazon Associates, we earn from qualifying purchases.
Видео Spiker Engineering Scangauge/Ultragauge Mount канала Timmy The Toolman
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Death Valley 4wheeling & Camping Adventure - December 2020 (Part 5)Death Valley 4wheeling & Camping Adventure - December 2020 (Part 4)Harbor Freight 20 Ton Press Upgrade MODHead Gasket Failure Diagnosis - Misfire code P0300 (P0301, P0302, P0303, P0304, P0305, P0306)Mod Day at Timmy's November 3, 2018 - A Toyota Event (SICMODS)RCI Offroad Skid Plate Install (Toyota 4Runner & Toyota Tacoma)Crankshaft Play (Toyota 5VZ-FE Engine) Part 1Death Valley 2022"SICMODS" Mod Day BBQ at Timmy the Toolman's (Subscriber Appreciation Day - April 13th 2019 )Snake Lake Off-Roading 4x4 Trip (Part 1) - Tahoe National ForestPismo's Annual Toyota Land Cruiser Turf n' Surf 2019 (Oceano Dunes SRVA - Pismo, California)How to Install Off-Road Tires onto Method Beadlock Race WheelsHow to Perform an Engine Block Test - (Head Gasket / Cracked Head Diagnosis)80/100 Series Transfer Case Rebuild/Modification (Low/High Range Gears & Part Time 4wd Kit) (Part 4)FJ Cruiser Lock Cylinder and Door Handle ReplacementToyota R150F Manual Transmission Rebuild (Part 1)Engine Compression and Leak Down Test (Toyota Land Cruiser FZJ80)Toyota FZJ80 Land Cruiser Drivetrain Fluid MaintenanceOTC Tool ReviewARCWORXS Outboard Shock Relocation Kit (3rd Generation Toyota 4Runner)Roof Rack Sun Shower Holder Mod