2000 Nissan Almera Timing Chain Replacement Part 2: Rebuild + Start!

In this episode, I fit the chain and rebuild the side of the engine, hit some issues with a head gasket, find a leak or two and get her started, only to have a misfire!

Tech Specs: 2000 MY Nissan Almera N16 with QG15DE (89BHP) non-VVT engine

Tools Used:
- 10mm 12mm socket on 1/4 Drive Ratchet
- 14mm socket on a 3/8 Drive Ratchet
- 10 mm Spanner for Oil Pickup fixings
- 3/8 Universal Joint adapter for awkward angles
- 22mm Socket on 1/2 Torque Wrench to tighten Camshaft Bolts
- 22mm Spanner to hold camshafts
- Rubber Mallet to aid refitting chain cover
- Philips head screwdriver to replace Cam Cover screws
- Pliers to replace clamps
- *I think* 24mm socket on 1/2 Drive Torque Wrench to tighten Crank Pulley bolt

Camshaft and Crank Torque Specs:
Inlet Cam - 83Nm
Exhaust Cam - 115Nm
Crankshaft - 142 Nm

Видео 2000 Nissan Almera Timing Chain Replacement Part 2: Rebuild + Start! канала bakergtr