Woodford Halse Bracket Starter
A 4mm scale model of a semaphore signal for Woodford Halse.
The signal is servo operated and lit by LED / Fibre Optics.
The servo controllers are from GF Controls.
The signal is scratch built by Steve Hewitt, using mainly Brass and Nickel Silver with soldered assembly.
Several Etched and 3D Printed components have been created by Les Green, other commercially available items have come from Model Signal Engineering.
Видео Woodford Halse Bracket Starter канала Steve Hewitt
The signal is servo operated and lit by LED / Fibre Optics.
The servo controllers are from GF Controls.
The signal is scratch built by Steve Hewitt, using mainly Brass and Nickel Silver with soldered assembly.
Several Etched and 3D Printed components have been created by Les Green, other commercially available items have come from Model Signal Engineering.
Видео Woodford Halse Bracket Starter канала Steve Hewitt
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
LLS Train Movements 1
Carlisle Signal - Rome Street Jct Up Home
8F on test for Liverpool Lime Street
Westinghouse Ground Signal
Liverpool Lime Street - Railmotor & Suburban Arrival in the cutting.
Signals for Keswick No 1 Box - LNWR Ground Signals
Carlisle 3 Welded Stem Brkt
Stowe Magna Bracket semaphore railway signal
LLS Gantry test
LMS Round Post Bracket for WotH
Churminster semaphores
GWR Ground Signal - rear
Signal for Keswick No 1 Box - Levers 1 & 14
LLS G2 leaves with TPO set
Signal for Keswick No 1 Box - Levers 1 and 14
AW Cantilever Bracket
Lime Street Operations Jan 2017
Lattice and Welded Stem Brackets
Lime Street training session
Sector plate demo