Ambient lighting for Passat B7 - DIY

1. Order laser cutting for plexyglass or acryl transparent glass. You need strips 5mm*5mm 450mm lenght.
2. Ask to do perpendicular strips every 2mm on single or both surfaces
3. Whet one size to do it 2.5*5mm. Use 2 surfaces with extra small angle and Dremel
4. Whet LED to do it flat and fit to thin side of light-transmitter. Fix by transparent glue.
5. Connect cathode with resistor 560 Ohm and wire to 12V.
6. Enjoy here result!

Видео Ambient lighting for Passat B7 - DIY канала Андрей Яковлев