Dodge Journey - POWER WINDOW SWITCH REMOVAL / REPLACEMENT

Step-by-step guide on how to remove / replace / install main master power window regulator switch on a Dodge Journey SUV (2009 | 2010 | 2011 | 2012 | 2013 | 2014 | 2015 | 2016 | 2017 | 2018 | 2019 | 2020 | 2021 | SE | SXT | LIMITED | CREW | R/T).

Usually the front left power window switch will go bad on a Dodge Journey. If this happens to you the switch assembly will have to be replaced. All you will need is a plastic pry tool or a flat screwdriver. If using flat screwdriver be careful not to do any damage to the door panel.

To start pry out the power window switch like shown on the video. Then disconnect two electrical connectors and remove the switch. Now you can install new window switch on your Dodge Journey. As easy as that.

Thanks for watching.
Don't forget to Like the video / SUBSCRIBE to the channel!

⚠ DISCLAIMER:
While QuiteAlright strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. The videos are intended for information only. Follow the manufactures repair procedure and use appropriate safety procedures. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. QuiteAlright is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

Видео Dodge Journey - POWER WINDOW SWITCH REMOVAL / REPLACEMENT канала QuiteAlright