Touch Mi auto bed leveling guide - BLtouch alternative? UPDATE IN DESCRIPTION
UPDATE: I fitted the same partsusing the same steps to the Artillery3D X1 and it worked very well: https://youtu.be/V3zEJGOcz7s
I have no idea why it was so poor on the Ender 3. The point is that this is a good system, and tech support plus a premade copy of Marlin 1.1.9 is available if you contact the creator.
I’m a fan of auto bed leveling and BLtouch especially, but thought it was worth checking out the novel Touch Mi from hotends.fr as an alternative. Considering you don’t need a pin27 board for this on Creality printers like you do for the BLtouch, it becomes even cheaper.
I really appreciate the innovation of this sensor. To avoid the need for a servo PWM pin from the mainboard, it instead uses a magnet to lift a magnetic ball bearing and release the probing pin. The pin lifts inside the housing upon bed contact, triggering the sensor. When the probing is done, moving the nozzle close to the bed pushes the pin up enough for the magnet to attract it clear for printing.
Unfortunately, sometimes the homing magnet activates the probe at the wrong time, causing some nasty grinding. I also found the repeatability of this probe poor compared to the BLtouch.
If I’m doing something wrong, please let me know! As I said in the video, I could slow down the probing, but this is not necessary for other ABL systems.
I had to email hotends.fr to receive the online manual pdf, therefore I consider it not available publically and will not put the link here. Please email them if you are a customer.
Online free PDF translator: https://www.onlinedoctranslator.com/en/translationprocess-pdf
Hero Me part cooling duct with Touch Mi mount (this mount sat too high for me): https://www.thingiverse.com/thing:3092044/
Hero Me Touch Mi lower position remix (I needed the 2mm lower version): https://www.thingiverse.com/thing:3325306/
Ender 3 Touch Mi magnet mount (I used the taller one): https://www.thingiverse.com/thing:3197123
Pronterface download: https://www.pronterface.com/
If you are on Ender 3 and need a bootloader: https://youtu.be/fIl5X2ffdyo
Ender 3 Vanilla Marlin: https://youtu.be/N7JLchsFRDU
If you are on Ender 5 and need a bootloader/vanilla Marlin: https://youtu.be/aQIg9zxuCvM
Buy quality and affordable filament from X3D. Buy 3, get 1 free and a free sample pack with every order: www.x3d.com.au
Take a look around and if you like what you see, please subscribe.
Support me on Patreon: http://www.patreon.com/teachingtech
#3dprinting #ender3 #touchmi
Видео Touch Mi auto bed leveling guide - BLtouch alternative? UPDATE IN DESCRIPTION канала Teaching Tech
I have no idea why it was so poor on the Ender 3. The point is that this is a good system, and tech support plus a premade copy of Marlin 1.1.9 is available if you contact the creator.
I’m a fan of auto bed leveling and BLtouch especially, but thought it was worth checking out the novel Touch Mi from hotends.fr as an alternative. Considering you don’t need a pin27 board for this on Creality printers like you do for the BLtouch, it becomes even cheaper.
I really appreciate the innovation of this sensor. To avoid the need for a servo PWM pin from the mainboard, it instead uses a magnet to lift a magnetic ball bearing and release the probing pin. The pin lifts inside the housing upon bed contact, triggering the sensor. When the probing is done, moving the nozzle close to the bed pushes the pin up enough for the magnet to attract it clear for printing.
Unfortunately, sometimes the homing magnet activates the probe at the wrong time, causing some nasty grinding. I also found the repeatability of this probe poor compared to the BLtouch.
If I’m doing something wrong, please let me know! As I said in the video, I could slow down the probing, but this is not necessary for other ABL systems.
I had to email hotends.fr to receive the online manual pdf, therefore I consider it not available publically and will not put the link here. Please email them if you are a customer.
Online free PDF translator: https://www.onlinedoctranslator.com/en/translationprocess-pdf
Hero Me part cooling duct with Touch Mi mount (this mount sat too high for me): https://www.thingiverse.com/thing:3092044/
Hero Me Touch Mi lower position remix (I needed the 2mm lower version): https://www.thingiverse.com/thing:3325306/
Ender 3 Touch Mi magnet mount (I used the taller one): https://www.thingiverse.com/thing:3197123
Pronterface download: https://www.pronterface.com/
If you are on Ender 3 and need a bootloader: https://youtu.be/fIl5X2ffdyo
Ender 3 Vanilla Marlin: https://youtu.be/N7JLchsFRDU
If you are on Ender 5 and need a bootloader/vanilla Marlin: https://youtu.be/aQIg9zxuCvM
Buy quality and affordable filament from X3D. Buy 3, get 1 free and a free sample pack with every order: www.x3d.com.au
Take a look around and if you like what you see, please subscribe.
Support me on Patreon: http://www.patreon.com/teachingtech
#3dprinting #ender3 #touchmi
Видео Touch Mi auto bed leveling guide - BLtouch alternative? UPDATE IN DESCRIPTION канала Teaching Tech
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Autoleveling on 3D printers: 9 myths and 12 sensors tested!3 Fixes for BLtouch V3 on Creality machinesTouch Mi vs BLtouch on the Artillery3D X1 + MKS TFT babysteppingCR-6 auto bed levelling for free on the Ender 3 - New printable modBFPTouch / Poor's man BLtouch Clone - best method for 3d printer auto bed levelingOrbiter - Super light weight direct drive extruder on Seckit SK-GOTouch-mi sur l'ender 3Touch Mi - alternative auto bed leveling sensor for 3D Printer12 3D printed tools you need for your workshopAuto Bed Level Inductive Sensor for 3D PrintersSuper easy ABL: TRU-LEV 600 on Ender 3DIY Bed Leveling SensorCreality 32 bit V4 board guide - Ender 3 V2, BLtouch & moreHero Me Gen 5: The ultimate part cooling fan duct for Creality 3D printers?BLtouch advanced guide: Fully automated bed homing and levellingTiny-Touch - a DIY BLTouch "clone" (3D Printing)Ender 3 coreXY conversion kit from Kay3DCreality ENDER 3 V2 - How To EDIT & UPLOAD New FirmwareEnder 5 enclosed lid and heated chamber guide