DIY EPOXY LED Floor Lamp from RECLAIMED Beam (+ concrete & 3D printed base)

This episode shows how to make a DIY floor lamp by pouring epoxy resin over LED strips in the natural crack of a reclaimed wood beam. I really like how the light from the LEDs shining through the epoxy resin take the shape of the natural crack in the reclaimed wood beam. I also made a DIY concrete base for the lamp, with a 3D printed insert that holds acrylic rods. The acrylic rods connect the concrete & 3D printed base to the reclaimed wood beam with the epoxy-covered LED strips.

PATREON LAUNCH - thank you in advance for your support!
• https://www.patreon.com/modustrialmaker

For the epoxy resin pour, I used Total Boat high performance epoxy resin. The side-emitting LED strips are linked to below - I used 120 LED/m warm white LED strips. And yes, the epoxy resin covers the LED strips, but I used two LED strips in case one burns out :)

For the concrete mix, I used Fishstone's HP50 + super six admix with PVA fibers. This concrete mix is super flowly and yields a very clean surface right out of the concrete form.

Lastly, the 3D printing -- I modeled the 3D printed insert in Fusion 360, and printed it on my Anycubic Mega S 3D printer. I used Matter Hackers Pro PLA filament for the base.

\\ FOLLOW ME //
• Instagram: @modustrialmaker - https://goo.gl/F4UdEs o
• Blog: https://www.modustrialmaker.com

\\ LED products //
• side-emitting LED strips: http://bit.ly/37vqWzq
• LED power supply: https://amzn.to/36k26Rn
• power jack: https://amzn.to/2vc87mj
• on/off switch: https://amzn.to/36qLBTA

\\ CONCRETE LINKS //
• High Performance Concrete Recipes: http://bit.ly/2srpxtI
• HP50 concrete mix: http://bit.ly/2YL4MFA
• Super Six concrete admix: http://bit.ly/2PHbatm
• PVA fibers: http://bit.ly/36wrVOL
• Cake Fondant Tool for perfect edges: http://amzn.to/2w0JCVx
• Helical Mixing Paddle: https://amzn.to/2GFyxjF
• Concrete mixer: http://amzn.to/2kEnZFi
• Concrete pigments: http://bit.ly/2GxzWrf
• 1-part concrete sealer: http://amzn.to/2xW7Gth
• Black 100% Silicone Caulk: http://amzn.to/2B64iRY
• Paste Finishing Wax: http://amzn.to/2kF565e
• “From Scratch” GFRC Recipes: https://goo.gl/35RvFM

\\ EPOXY LINKS //

GET 15% OFF TOTAL BOAT with the CODE: “MODUSTRIAL” (when purchased through www.jamestowndistributors.com)
• Total Boat 2:1 Epoxy Resin: https://amzn.to/2ElKHgz
• Torch: https://amzn.to/2XEp2ug
• Tuck Tape: https://amzn.to/35jN5zj
• White epoxy resin Pigment: https://amzn.to/2LC3o1z
o Rubbing Compound: https://amzn.to/2pEdPuQ
o Finishing Compound: https://amzn.to/2D3zGPu

\\ HIKOKI / METABO HPT TOOLS //

o Multivolt cordless Miter Saw: http://bit.ly/35uSUdb
o 2.25hp Router: https://amzn.to/36czcUG
o Drill & Impact Driver Kit: https://amzn.to/2NcYXv5

\\ SURF PREP SANDING//
o SurfPrep 5” random orbit sander: http://bit.ly/2OauxeJ
o SurfPrep 4”x3” rectangular random orbit sander: http://bit.ly/2Ozm2sJ
o SurfPrep foam sanding pads (to 320 grit): http://bit.ly/2pFb8sZ

#diy
#concrete
#woodworking
#reclaimed wood
#bench
#diybench
#resin
#epoxyresin
#epoxy
#epoxypour
#epoxystabilized

Видео DIY EPOXY LED Floor Lamp from RECLAIMED Beam (+ concrete & 3D printed base) канала Modustrial Maker