Sandwich Core Materials
Click here to see these products & more on Fibreglast.com: http://goo.gl/iEbLRc
Sandwich Core Materials are lightweight, structural layers that are embedded between laminate layers in order to build bulk and strength for a part—without adding significant weight. By employing sandwich core materials in your part or mold, you can achieve much higher flexural strength and flexural modulus than using skin laminates alone.
Want to learn more about Sandwich Core? Visit the Learning Center and read our white paper, Guidelines for Sandwich Core Materials.
Sandwich Core materials from FibreGlast.com include:
Nomex® Honeycomb—Offers the very best strength-for-weight ratio in this category; flexible, fire retardant, and delivers good impact resistance.
End Grain Balsa—Conforms to practically any simple curve and most gradual curves.
Foam—Includes sheets of vinyl and polyisocyanurate, as well as mix-and-pour foam; all are closed cell and resist water, gas, and oil.
All the Sandwich Core materials in this category are compatible with epoxy, vinyl ester, and polyester resins, and can be used for most lay-up techniques, including vacuum bagging and infusion.
Видео Sandwich Core Materials канала Fibre Glast
Sandwich Core Materials are lightweight, structural layers that are embedded between laminate layers in order to build bulk and strength for a part—without adding significant weight. By employing sandwich core materials in your part or mold, you can achieve much higher flexural strength and flexural modulus than using skin laminates alone.
Want to learn more about Sandwich Core? Visit the Learning Center and read our white paper, Guidelines for Sandwich Core Materials.
Sandwich Core materials from FibreGlast.com include:
Nomex® Honeycomb—Offers the very best strength-for-weight ratio in this category; flexible, fire retardant, and delivers good impact resistance.
End Grain Balsa—Conforms to practically any simple curve and most gradual curves.
Foam—Includes sheets of vinyl and polyisocyanurate, as well as mix-and-pour foam; all are closed cell and resist water, gas, and oil.
All the Sandwich Core materials in this category are compatible with epoxy, vinyl ester, and polyester resins, and can be used for most lay-up techniques, including vacuum bagging and infusion.
Видео Sandwich Core Materials канала Fibre Glast
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Easy Tricks Using Fiberglass Strengthening!Composite Core ConstructionExperimental boat building. Will it work??Laminate Sample #15: Vacuum Bagged "Wet-Preg" Carbon / Epoxy with Foam CoreBalance Build Technology - Foam Core Done RightPlastic Honeycomb Composite Panels VS PlywoodLaminate Sample #1: Light Carbon Fiber on 9mm Nomex - Vacuum Bagged Epoxy Wet-layupSuper Strong Epoxy with Diamonds and More!How to Make a Roll Wrapped Carbon Fibre TubeStep 45: Making Divinycell H80 Foam Core Panels & Peel Ply, Our Tips & Tricks Power Catamaran BuildHands On With The New Coring Material For The Bertram Project ~ CoosaUnderstanding Honeycomb Panel and Honeycomb Composite StructuresLaminate Sample #13: Open Molded E-glass / Polyester Resin with Balsa Core17. Sandwich PanelsHow To Fiberglass Laminating TutorialThe Basics of Fiberglass FabricSULA. Building a sailboat in foam sandwichCarbon Fiber vs Kevlar vs Fiberglass - Which one is right for YOU?Working With Honeycomb Structural Panels. Onboard Lifestyle ep.48