BilliB Grandfather Clock setup video

Setting up a BilliB grandfather clock is not difficult and this video will show you how. If you are looking at buying a grandfather clock then come and see our range at http://www.billib.co.uk or even arrange to come and visit our showroom in Bournemouth.

BilliB clocks are constructed with the consumer in mind giving ease and simplicity
Remove the clock from the shipping carton after ensuring all the staples are safely removed to avoid scratching the clock
Open the back or side panels of the clock to see the movement.
Remove the cardboard and or chime rod protectors from around the chime rods; slide the cardboard band down and off the chime rods.
Lift the chime hammer transit bars, (if applicable) which will release the chime hammers or cut the band enabling the hammers to move freely.
Replace the back and or side panels.
Move the clock to its final location, now hang the pendulum.
Hang the weights, making sure the clock is square and level.
Now give the pendulum a good swing, all BilliB clocks will go straight into balance* and start chiming.

*Automatic balance Feature is standard on most BilliB clocks

Видео BilliB Grandfather Clock setup video канала BilliB Clocks