Table gear shaft and bushings - Restoring a Brown and Sharpe Grinder, Part 3
In this one, I use my newly built Walker Turner drill-press milling machine to make a new shaft and bushing for the x-axis table drive-gear on the Brown and Sharpe No.2 surface grinder. I modify a new shaft to accommodate oil flow and press in a new bushing too. The new shaft is hardened but the drill-press mill did just fine with it. It turned out better than I thought it could. I hope you enjoy!
Видео Table gear shaft and bushings - Restoring a Brown and Sharpe Grinder, Part 3 канала Robert Adair
Видео Table gear shaft and bushings - Restoring a Brown and Sharpe Grinder, Part 3 канала Robert Adair
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Mini Lathe Upgrade: Oil Lubricated HeadstockMaking an Atlas (Craftsman) 12" Lathe from eBay spare PartsLathe Restoration5 CREATIVE AND USEFUL DIY IDEASNew Paint! - Restoring a Brown & Sharpe Surface Grinder, Part 29.5" Inch 4140 Gearbox Shaft Part 12 In 1 Drill Press / Angle Grinder Stand || Homemade Project【加工動画25】旋盤で六角穴/How to make a hexagonal hole with a lathe.DIY gear hobbing attachment for milling machine (part 1)The Infamous Mini Lathe!【加工動画16】旋盤で球体/ How to make a sphere on a lathe.Repairing a Worn Gear Drive Shaft - Brown and Sharpe No 2 Restoration - Part 4Mini Lathe bearing caps for the new BearingsChange the motor in a small lathe to 2.2kwWoodturning - A Little Something DifferentHow To Make A Angle Grinder Belt Sander || Angle Grinder Attachment11 WORST CIRCULAR SAW MISTAKES!! And How To Avoid them...(DON'T DO THESE THINGS! Kickback/Binding)More Usable Travel - Fixing a Cheap Magnetic DrillBROWN & SHARPE SURFACE GRINDERLATHE SETUP