I blew up another power supply! Building a cheap arcade test rig - PART 2

This is the second part of putting together a cheap and flexible Jamma arcade test rig.

In this episode, I put together a proper power circuit that will make the test rig much safer to use. In addition, I expand the functionality to enable testing of original CRT arcade monitors.

The power circuit I put together in this video is also a proper circuit to power an actual arcade machine, so the walkthrough may come in handy for anyone repairing or building an arcade machine.

WARNING: Always be extremely careful and take proper precautions when working with power wiring, especially AC voltage!

Based on Bob Roberts' guide: http://therealbobroberts.net/acwiring.html

Tools and supplies used in this video
-----------------------------------------------------------

-Note: Amazon affiliate links provided when possible, but some of these items can be found much cheaper on other sites. Commissions earned through these links help to support and improve the channel.-

Crimp tool and terminals - https://amzn.to/2nD8pz9

Molex crimp tool - https://amzn.to/2nD4Adj

Various molex connectors and pins

18 gauge wire - try to find OFC wire vs CCA . If using CCA, consider 16 gauge

EMI Line Filter - https://amzn.to/2nDdeZj

Power distribution / terminal strip - https://amzn.to/2pagxYF

Fuse holder - https://amzn.to/2oeHqKl

Fuse (no more than 5 amp, 3 should be good)

Power supply- https://amzn.to/2mNLAsm

Isolation transformer
Music
---------
Music from https://filmmusic.io
"I Can Feel It Coming" , "Jazz Brunch" by Kevin MacLeod (https://incompetech.com)
License: CC BY (http://creativecommons.org/licenses/by/4.0/)

Видео I blew up another power supply! Building a cheap arcade test rig - PART 2 канала Shoot Again Arcade