DIY 500 Watts Mono High Power Amplifier Transistor C5200 and A1943 - V2

➤ How to make 1000 watts high power amplifier.
The power amplifier circuit using A1015, C1815, A940, D1047, B817 and power 2SC5200, 2SA1943 transistor. Output up to 500 Watt Mono.
Note:
- 1000 Watts for the stereo amplifier circuit.
- It is important to note that this project is NOT for Beginners. You need average knowledge of electronics and have assembled simpler projects. If you have no experience in assembling amplifiers, we recommend starting with the Simple Amplifier.
▬▬▬▬▬▬▬▬▬▬ ۞▬▬▬▬▬▬▬▬▬▬
➤ Copyright © by Share Tech Creative
➤ Thanks for watching my video
➤ Follow me:
https://www.youtube.com/c/ShareTechCreative?view_as=subscriber=1
➤ Follow Facebook:
https://bit.ly/3eEHjNb
▬▬▬▬▬▬▬▬▬▬ ۞▬▬▬▬▬▬▬▬▬▬
Schematic diagram:
https://photos.app.goo.gl/R3mSXLri8x1yDrTq8
Amplifier using:
➤ 2SC1815 Transistors x 1
➤ 2SA1015 Transistors x 2
➤ 2SC2383 Transistors x 2
➤ 2SA940 Transistors x 1
➤ 2SD1047 Transistors x 1
➤ 2SB817 Transistors x 1
➤ 2SC5200 Transistors x 5
➤ 2SA1943 Transistors x 5
➤ 0.22/5W resistors x 10
➤ 4.7/1W resistors x 10
➤ 10/2W resistors x 1
➤ 120/2W resistors x 2
➤ 150/1W resistors x 3
➤ 33 resistors x 1
➤ 1K resistors x 1
➤ 3K3 resistors x 2
➤ 4K7 resistors x 2
➤ 10K resistors x 1
➤ 33K resistors x 2
➤ 100K resistors x 1
➤ 100P capacitors x 2
➤ 680P capacitors x 2
➤ 0.1uF capacitors x 1
➤ 1uf/50v capacitors x 1
➤ 47uf/50v capacitors x 1
➤ 100uf/50v capacitors x 1
➤ 10.000uf/80v capacitors x 2
➤ 4007 Diode x 3
➤ Bridge Diode 35A X 1
➤ ZENER Diode 24V X 1
➤ Coil 16 turn (Copper wire Ø1.5mm wrapped 16 turns of 12mm diameter)
➤ 50k Potentiometers x 1
➤ Transistors insulation pads x 10
➤ Aluminum heat sink x 1( Use aluminum heatsink as big as possible :))
➤ 50vac x 2 / 30A transformer or larger more

Видео DIY 500 Watts Mono High Power Amplifier Transistor C5200 and A1943 - V2 канала Share Tech Creative