Charging Your Vehicle | How To | 2021 Jeep Wrangler 4xe
Your 2021 Jeep Wrangler 4xe requires regular connect to an electric charging station, either via home install our at a public EV charging station. Learn how to charge a car battery with this official OM video.
Transcript
[music]
Your vehicle features a chargeable hybrid powertrain. For convenience and optimum charging, we recommend you have a 240 Volt AC Level 2 charging station installed in your home by a qualified electrician. It takes about 2 and a half hours for a depleted battery to fully recharge at a Level 2 charging station.
When using a public charging station, first make sure the station’s ready to provide a charge, and that your vehicle’s in Park. Then, plug the charge connector into the vehicle’s charging inlet. You’ll hear a click when the charge connector engages. The vehicle should start charging automatically, unless you’ve selected scheduled charging at another time. If not, please check the instructions at the charging station.
Your vehicle comes equipped with a standard AC Level 1 charging system that plugs into any standard AC grounded outlet. It takes about 12 hours for a depleted battery to fully recharge at a Level 1 charger.
You’ll find the Level 1 cord set, or EVSE, in the rear cargo area below the load floor. Lift up the cargo strap of the load floor cover, and remove the EVSE from the storage bag in the bin below. Then, plug the cord into a standard 120 volt AC power outlet, preferably on a circuit that isn’t powering any other devices.
[text on screen] Please note: extension cords may not be used when charging your vehicle.
[voice over] The cord set will complete a self-diagnostic. When all the lights turn green on the status indicator display of the cord set enclosure, you’re ready to connect the charger to the vehicle’s charge inlet.
[text on screen] Consult your Owner’s Manual if red or yellow lights are illuminated.
[voice over] If there’s a connection error, a red or yellow light will illuminate.
You’ll find the charge inlet access on the driver side of the vehicle just in front of the driver door. To charge the high voltage battery, shift into Park and turn the ignition off.
Push the connector firmly into the charge inlet. You’ll hear a click when the connector is fully engaged. If it’s not, the vehicle may not charge.
The charging cycle will automatically initiate when these conditions are met:
- The cord set has completed its self-test without any error lights,
- The wall receptacle is functional and producing power,
- The hood is closed,
- And, when enabled, the vehicle’s charging schedule is set for charging at the current date and current time.
Your hybrid uses instrument panel state of charge indicator lights on the dashboard to indicate the progress of each charging cycle. Each light represents a percentage.
One blinking light means the charge is zero to 20% complete.
One solid and one blinking light means the charge is 21 to 40% complete and so on.
When the charge is complete, the lights will go out, the charge cycle will end, and the vehicle will go to sleep to conserve energy.
To unplug the vehicle, push the button on the connector handle and pull firmly to remove the cord from the vehicle’s charge inlet.
Keep in mind, you can safely unplug your car at any time during the charging cycle.
This video is not intended to take the place of your Owner's Manual. For complete details and other important safety information, please see your Owner's Information.
[text on screen] Copyright 2021 FCA US LLC. All Rights Reserved. Jeep and Mopar are registered trademarks of FCA US LLC.
Видео Charging Your Vehicle | How To | 2021 Jeep Wrangler 4xe канала Mopar
Transcript
[music]
Your vehicle features a chargeable hybrid powertrain. For convenience and optimum charging, we recommend you have a 240 Volt AC Level 2 charging station installed in your home by a qualified electrician. It takes about 2 and a half hours for a depleted battery to fully recharge at a Level 2 charging station.
When using a public charging station, first make sure the station’s ready to provide a charge, and that your vehicle’s in Park. Then, plug the charge connector into the vehicle’s charging inlet. You’ll hear a click when the charge connector engages. The vehicle should start charging automatically, unless you’ve selected scheduled charging at another time. If not, please check the instructions at the charging station.
Your vehicle comes equipped with a standard AC Level 1 charging system that plugs into any standard AC grounded outlet. It takes about 12 hours for a depleted battery to fully recharge at a Level 1 charger.
You’ll find the Level 1 cord set, or EVSE, in the rear cargo area below the load floor. Lift up the cargo strap of the load floor cover, and remove the EVSE from the storage bag in the bin below. Then, plug the cord into a standard 120 volt AC power outlet, preferably on a circuit that isn’t powering any other devices.
[text on screen] Please note: extension cords may not be used when charging your vehicle.
[voice over] The cord set will complete a self-diagnostic. When all the lights turn green on the status indicator display of the cord set enclosure, you’re ready to connect the charger to the vehicle’s charge inlet.
[text on screen] Consult your Owner’s Manual if red or yellow lights are illuminated.
[voice over] If there’s a connection error, a red or yellow light will illuminate.
You’ll find the charge inlet access on the driver side of the vehicle just in front of the driver door. To charge the high voltage battery, shift into Park and turn the ignition off.
Push the connector firmly into the charge inlet. You’ll hear a click when the connector is fully engaged. If it’s not, the vehicle may not charge.
The charging cycle will automatically initiate when these conditions are met:
- The cord set has completed its self-test without any error lights,
- The wall receptacle is functional and producing power,
- The hood is closed,
- And, when enabled, the vehicle’s charging schedule is set for charging at the current date and current time.
Your hybrid uses instrument panel state of charge indicator lights on the dashboard to indicate the progress of each charging cycle. Each light represents a percentage.
One blinking light means the charge is zero to 20% complete.
One solid and one blinking light means the charge is 21 to 40% complete and so on.
When the charge is complete, the lights will go out, the charge cycle will end, and the vehicle will go to sleep to conserve energy.
To unplug the vehicle, push the button on the connector handle and pull firmly to remove the cord from the vehicle’s charge inlet.
Keep in mind, you can safely unplug your car at any time during the charging cycle.
This video is not intended to take the place of your Owner's Manual. For complete details and other important safety information, please see your Owner's Information.
[text on screen] Copyright 2021 FCA US LLC. All Rights Reserved. Jeep and Mopar are registered trademarks of FCA US LLC.
Видео Charging Your Vehicle | How To | 2021 Jeep Wrangler 4xe канала Mopar
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Charging your Jeep Wrangler 4xe Everything you need to know.Will the Jeep wrangler 4xe charge using a J1772 to Tesla adapter.How to Charge The Jeep Wrangler 4xe3 Easy Upgrades for the Jeep Wrangler Anyone Can Do!Breaking News Surprise: The 2021 Jeep Wrangler 4xe Plug-In Has A Lot More POWER Than The Bronco!Lectron Level 2 240V J1772 mobile charger for a Jeep Wrangler 4XEThe New Jeep Wrangler 4xe Took Me THIS Far Using Zero Gas: It's Not What You Think!Here’s why the Jeep Wrangler 4xe could be a better option!Jeep Production in the United StatesDid Electrifying The Jeep Make It Better? // 2021 Wrangler 4xe ReviewNew features Jeep Wrangler 2021 4xe test driveThe 2021 Jeep Wrangler 4xe is No Compromise Electrified Wrangler For On & Off The Road1 week of owning a Jeep Wrangler 4xe hybridHow far can the Jeep wrangler 4xe ACTUALLY go on 1 tank of gasHow Far Can I Off-Road in Full ELECTRIC Mode?10 Things I Didn't Know About the Jeep Wrangler 4xeEV Hybrid vehicle charging mistakes Jeep Rubicon 4XE디펜더 vs G350 vs 랭글러 - 언덕 드래그 레이스 및 오프로드 대결!How I got a $700 Chargepoint LEVEL 2 charger for FREE for my 2021 Wrangler 4xe Hybrid & you can too!