PART 4 C10 5" FRONT DROP | CUT COIL SPRINGS AND DROP SPINDLES
For more pictures and information on my projects, please check out my Facebook and Instagram pages!
FACEBOOK: https://www.facebook.com/milkcrate82/
INSTAGRAM: https://www.instagram.com/milkcrate82/
In this video series, I'm doing a 5" drop on the front of my 1977 Chevy squarebody C10. I will be cutting the stock, original coil springs netting roughly a 2" to 2.5" drop from the coil springs. I will also be using 2.5" drop spindles that I purchased from Chassis Tech.. I am also using tubular DJM upper control arms and new factory lower control arms. The front drop shocks are from CPP. The whole front suspension and steering will be new when I am finished.
Click this link for the 7" rear drop video series!
https://youtu.be/AwfpK0jpMNA
For the rear drop, I will be using a axle flip kit from Belltech. I am also installing all new urethane bushings from Energy Suspension in both ends of the stock leaf springs as well as the factory spring shackles. While I'm at it, I remove a few of the individual leaves from the leaf spring pack to reduce the spring rate to smooth out the ride. I am also using Belltech drop shocks in the rear.
Видео PART 4 C10 5" FRONT DROP | CUT COIL SPRINGS AND DROP SPINDLES канала milkcrate82
FACEBOOK: https://www.facebook.com/milkcrate82/
INSTAGRAM: https://www.instagram.com/milkcrate82/
In this video series, I'm doing a 5" drop on the front of my 1977 Chevy squarebody C10. I will be cutting the stock, original coil springs netting roughly a 2" to 2.5" drop from the coil springs. I will also be using 2.5" drop spindles that I purchased from Chassis Tech.. I am also using tubular DJM upper control arms and new factory lower control arms. The front drop shocks are from CPP. The whole front suspension and steering will be new when I am finished.
Click this link for the 7" rear drop video series!
https://youtu.be/AwfpK0jpMNA
For the rear drop, I will be using a axle flip kit from Belltech. I am also installing all new urethane bushings from Energy Suspension in both ends of the stock leaf springs as well as the factory spring shackles. While I'm at it, I remove a few of the individual leaves from the leaf spring pack to reduce the spring rate to smooth out the ride. I am also using Belltech drop shocks in the rear.
Видео PART 4 C10 5" FRONT DROP | CUT COIL SPRINGS AND DROP SPINDLES канала milkcrate82
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Part 23 Motorized Bike | 3HP 4 Stroke EnginePart 22 Motorized Bike | 3HP 4 Stroke EnginePART 1 FABRICATING & MIG WELDING BOAT CRADLES | Sailboat lifting cradles1923 Ford T-bucket Hotrod | RatrodMotorized Bike Muffler Swap Pt. 1Part 3 Fatmat Install | Stereo Noise ControlPart 6 Yamaha SR500 Brat Tracker | Street BobberPART 6 HARLEY FXE SHOVELHEAD CHOP PROJECT | King and Queen SpringerCHEVROLET K20 REAR SUSPENSION REBUILD | Fixing the Ranch Truck!Part 2 Yamaha SR500 Brat Tracker | Street BobberPart 5 Yamaha SR500 Brat Tracker | Street BobberPART 1 LS ENGINE CUSTOM INTAKE TUBE FABRICATION | Vortec 4.8 5.3 6.0 6.2 V8 CAIPart 20 Motorized Bike | 3HP 4 Stroke EnginePart 3 C10 Spare Tire CarrierPart 16 C10 Auto Meter Gauges | Factory Gauge ReplacementPart 4 250 Inline 6 Valve Seals Repair | Valve LappingPart 7 Custom C10 Rear Bumper | Narrow Bumper Fabrication4 Stroke Bike Repair Part 2PART 2 CHEVY C10 EXPANSION TANK BUILD | TIG Welding An Aluminum Coolant ReservoirPart 3 Yamaha SR500 Brat Tracker | Street BobberPart 5 Motorized Bike Chain Guard