Huawei Nova 5t YAL-L21 FRP Remove with SigmaKey

Huawei Nova 5t YAL-L21 FRP Remove with SigmaKey | Huawei Nova 5t FRP Remove , Bypass , Unlock With SigmaKey (Test Point) Method |

Procedure:
1.Select "HISILICON" platform from the tab menu in the upper left side of the software
2.Go to "Service" bookmark
3.Select from drop-down list the required platform that fits to your device HiSilicon [ Kirin 980 ][v].
If you do not select the platform, the software will ask you to select *.xml file from the factory software that fits this phone (in the manufacturer's original format).
4.Connect the phone to PC using USB cable in the FACTORY mode
It should be detected as HUAWEI USB COM 1.0 device (VID12D1 PID3609) in the System. In most cases Testpoint has to be used to force the device to FACTORY mode
5.Select "HUAWEI USB COM 1.0 device" in the ports selection tab.
6.Press "Remove FRP/Huawei ID" button.
7.The message "Removing FRP/Huawei ID… Done" indicates that procedure has been completed successfully.
8.After completing all service operations on the device, perform master reset
=============================================================
This video is only for educational purpose,i did not make this video for any illegal activities,all contents provided by this channel is only and only educational purpose.

hope you like the video.
if you like the video, please support us.
please like share and SUBSCRIBE our channel.
=====================================
thanks everyone for supporting us
best regards - (nk service)

Видео Huawei Nova 5t YAL-L21 FRP Remove with SigmaKey канала nk service